Bluetooth digital am/fm dual alarm clock radio with usb charging port (18 pages)
Summary of Contents for Jensen JCR-350
Page 1
Soothing Sounds Digital Clock Radio with Night Light MODEL: JCR-350 USER MANUAL PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE...
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Page 3
16. Use replacement part as specified by the manufacturer. 17. Upon completion of any service or repairs to this product, ask the service technician to perform safety checks. 18. Power Sources - This product should be operated only from the type of power source indicated on the marking label.
COMPLIANCE WITH FCC REGULATIONS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
The serial number of this product is found on its bottom. You should note the serial number of this unit in the space provided as a permanent record of your purchase to aid in identification in the event of theft of loss. Model Number: JCR-350 Serial Number:...
Page 7
CR2032 lithium battery (Not included). POWER CONNECTION 1. Connect the cord of the power adaptor to the DC IN JACK (#19) of the JCR-350. 2. Plug the power adaptor into a household wall socket. The unit is powered up and in standby mode when you see the display turn on.
5 seconds during the set-up process. ALARM OPERATION The JCR-350 features a dual alarm clock. Turning the alarms On and Off Tap the ALARM 1 BUTTON (#9) to turn ON the Alarm 1, the Alarm 1 icon will appear on the display and the alarm time will flash on the display for 5 seconds.
Repeatedly tap the VOLUME + BUTTON (#8) or VOLUME - BUTTON (#11) to select alarm sound source (AL, SPA or Radio). AL - flashing on the display for “Wake to Alarm” SPA – flashing on the display for “Wake to Sounds”, Default sound is Chirping Birds , repeatedly tap the SOUNDS BUTTON (#4) to select other Sound to wake to.
RADIO OPERATION Listening to the Radio 1. Tap the RADIO BUTTON (#3) to turn on the radio. The FM indicator and the current station frequency will show on the display. The display will automatically switch back to the time after 5 seconds. 2.
Page 11
LISTEN TO SOOTHING SOUNDS 1. Tap the SOUNDS BUTTON (#4) to turn on the soothing sounds. 2. Repeatedly tap the SOUNDS BUTTON (#4) to select one of the sounds available. The sound indicator and sound will change every time the SOUNDS BUTTON (#4) is pressed.
SPECIFICATIONS Power: AC Adaptor: Input AC 100-240V ~ Output: DC 5V 600mA Backup battery: 1 x 3V CR2032 (not included) Frequency Range: FM 87.5 – 108 MHz TROUBLESHOOTING GUIDE If you experience difficulties in the use of this clock radio, please check the following or call 1-800-777-5331 for Customer Service and support SYMPTOM POSSIBLE CAUSE...
Page 13
90 DAY LIMITED WARRANTY AND SERVICE VALID IN THE U.S.A. ONLY SPECTRA MERCHANDISING INTERNATIONAL, INC. warrants this unit to be free from defective materials or factory workmanship for a period of 90 days from the date of original customer purchase and provided the product is utilized within the U.S.A. This warranty is not assignable or transferable.
Need help?
Do you have a question about the JCR-350 and is the answer not in the manual?
Questions and answers