Steps
Note
Only when the Call Management Center function is enabled, should the call center
button be displayed. For details, see the configuration guide.
1. Tap Call →
to enter the residents calling page.
2. Enter the calling number.
The calling number format should be x-x-x-xxx. For example, the calling number of
Community 1, Building 2, Unit 3, and Room 405 is 1-2-3-405.
Note
The community No. can be omitted.
3. Tap the call button to start an audiovisual call.
4. Optional: Tap
2.1.3 Call Indoor Extension/Indoor Station
If you install indoor station and indoor extensions at home, you can call the indoor
extension via your indoor station, and vice versa.
Enter 【0-indoor extension No.】 on the indoor station to start calling.
Enter 【0-0】 to call the indoor station from the indoor extension.
2.1.4 Receive Call
Network Indoor Station Operation Guide
Figure 2-2 Call Resident
to call management center.
3