3. Arm the selected zone.
Note
Zones are configurable on the arming mode page.
●
24H alarm zone including smoke detector zone and gas detector zone will be
●
triggered even if they are disabled.
Arming mode settings should be configured with the settings of arming status
●
on the user page of the device.
2.6 Call Elevator
The indoor station supports calling the elevator.
Before You Start
Enable call elevator via iVMS-4200 Client Software.
Steps
1. Tap Settings →
Network Indoor Station Operation Guide
Figure 2-7 Arming Mode Settings
→ Shortcut Settings to enable Call Elevator.
9