3 Remote Operation via the client
software
The Video Intercom module provides remote control and configuration on video
intercom products via the iVMS-4200 client software.
3.1 Call Indoor Station
Steps
1. On the main page, click Access Control → Video Intercom to enter the Video
Intercom page.
2. Select a resident and click
selected resident.
3. After answered, you will enter the In Call window.
Click
to adjust the volume of the loudspeaker.
●
Click Hang Up to hang up.
●
Click
to adjust the volume of the microphone.
●
Note
One indoor station can only connect with one client software.
●
You can set the maximum ring duration ranging from 15s to 60s, and the
●
maximum speaking duration ranging from 120s to 600s via the Remote
Configuration of indoor station.
Network Indoor Station Operation Guide
in the Call Household column to start calling the
Figure 3-1 Calling Indoor Station
12