Table of Contents
Advertisement
1 Overview
This guide describes the installation of the ACTpro-100 door stations, which are compatible with all
ACTpro controllers.
The ACTpro-100 is a single door station.
The ACTpro-1002A is a single door station with a 12V DC 2A PSU.
1.1 Technical specification
Input Voltage Range
Current Consumption
Operating Environment
Operating Temperature
Dimensions (H x W x D mm)
Weight (kg)
Enclosure Material
LED Status Indicators
PSU Fault Output
Lid Opening Tamper Detection (Front)
Rear Tamper Detection
1.1.1 ACTpro-1002A electrical specification
Battery charging
Standby Battery
Battery Deep Discharge
Protection
Input: Voltage Rated
Input: Voltage Operating
Input: Frequency
Input: Max Current
Input: Mains input fuse
Input: Max standby power
© Vanderbilt 2019
ACTpro-100
12V DC
40–120 mA
Surface mounting
Internal use only
-10 to +50° C
165 x 235 x 55
0.4
ABS
Yes
n/a
Yes
No
Yes
12V 7Ah Battery
No
100–240V AC
90–264V AC
50–60Hz
1.0A (@ 90V AC)
T2.0A
0.5W (no load and no battery connected)
4
ACTpro-1002A
12V DC
40–120 mA
Surface mounting
Internal use only
-10 to +40° C
75% RH non-condensing
275 x 330 x 80
2.2
1.2mm steel grey powder coated
Yes
Yes
Yes
Yes
A-100542-b
15.03.2019
Advertisement
Table of Contents
