Overview; Technical Specification; Actpro 1520E Electrical Specification - Vanderbilt ACTpro 1500e Installation And Operating Instructions Manual

1 Overview

This guide describes the installation of the ACTpro 1520e and 1500e controllers.
The ACTpro 1500e Controller is a single door IP controller that requires an external 12V or 24V power
supply.
The ACTpro 1520e Controller is a single door IP controller with a 12V DC 2A PSU.
See also:
http://van.fyi/url/ACTpro1520e
l

1.1 Technical specification

Technical Details
Voltage Range (Controller)
Current Consumption (Controller)
Dimensions (1520e Controller)
Weight (1520e Controller)
Dimensions (1500e Controller)
Weight (1500e Controller)
Relay contacting rating
Operating temperature
Indoor use only

1.1.1 ACTpro 1520e electrical specification

The power supply is capable of delivering 2A. 1.5A is available for external locks and readers, 0.5A for the
PCB and battery.
Electrical Specification
Input Voltage
Frequency
Input Fuse
Output Voltage
Max Load
Electronic Output fuse
Battery Current
Battery Protections
© Vanderbilt 2018
230V AC +/- 10%
47-53 Hz
625mA 250V anti-surge fuse
13.65V (+/- 5%)
2A @ 25ºC
Yes
~ 0.5A for a battery discharged to ~ 10V
Deep Discharge/Over Charge/Reverse Polarity
EN – 5
11–24V DC
350mA (Max)
235mm x 255mm x 85mm
950g
235mm x 165mm x 55mm
465g
Main relay 5A / 50 V AC, AUX relay 1A /
50V AC
-10 to +50° C
A-100440
01.02.2018