Overview; Technical Specification; Electrical Specification - Vanderbilt ACT365-ACU Installation Instructions Manual

1 Overview

This guide describes the installation of the ACT365-ACU controller.
The ACT365-ACU Controller is a single door IP controller that requires an external 12V or 24V power
supply.
The ACT365-ACU2A Controller is a single door IP controller with a 12V DC 2A PSU.
The ACT365-ACUPoE Controller is a single door IP controller that is powered over Ethernet.
Sign up to ACT365 via www.act365.eu.

1.1 Technical specification

Voltage Range (Controller)
Current Consumption
(Controller)
Controller Dimensions
(H x W x D mm)
Controller Weight (kg)
Operating Temperature
Operating Environment
Enclosure Material
LED Status Indicators
PSU Fault Output
Lid Opening Tamper Detection
(Front)
Rear Tamper Detection

1.1.1 Electrical specification

PoE 802.3bt input (PoE++)
PoE 802.3at input (PoE+)
© Vanderbilt 2019
ACT365-ACU ACT365-ACU2A
11–24V DC 11–24V DC
350mA (Max) 350mA (Max)
165 x 235 x 55 275 x 330 x 80
0.4 2.2
-10 to +50° C -10 to +40° C
75% RH non-condensing
Surface Surface mounting
mounting
Internal use only
Internal use
only
ABS 1.2mm steel grey powder
coated
Yes Yes
n/a Yes
Yes Yes
No Yes
ACT365-ACU ACT365-ACU2A
N/A N/A
N/A N/A
4
ACT365-ACUPoE
11–24V DC
350mA (Max)
275 x 330 x 80
2.2
-10 to +40° C
75% RH non-condensing
Surface mounting
Internal use only
1.2mm steel grey powder
coated
Yes
Yes
Yes
Yes
ACT365-ACUPoE
13.8V at 3A output + 0.5A battery
charge
13.8V at 1A output + 0.5A battery
charge
A-100521-c
15.03.2019