Polling Reception - Kyocera ECOSYS MA2100cfx Operation Manual

Using Convenient Fax Functions > Polling Communication

Polling Reception

This function automatically triggers transmission of originals stored on the sending machine when the receiving machine
dials the sending machine's number.
NOTE
If you specified a destination for which encrypted communication is registered, encrypted communication is disabled
for polling reception.
To use polling reception, you must first ensure that the sending machine is set up for polling transmission.
Using sub addresses at the same time allows the communication modes described below.
Sub Address Bulletin Board Reception
If the recipient's machine has a sub address bulletin board function, you can use sub addresses to communicate with
that machine even if it is a third-party machine. (On this machine, the sub address and sub address password.)
Sub Address:
3333
IMPORTANT
The recipient's machine must also be equipped with a sub address bulletin board
function. Some fax machines cannot store originals and some do not support polling
transmission. Check both the sending and receiving machines beforehand to ensure
that they each have the required functionality.
Ask the recipient for the sub address and password that are registered in the
recipient's machine.
NOTE
For more information on sub addresses, refer to the following:
Sub Address Communication (page 5-8)
For information on how to receive files using sub address bulletin board communication,
refer to the following:
Using Polling Reception with Sub Addresses (page 5-20)
External FAX
5-19