Table of Contents
Advertisement
ESD-protected area
Equipment may be damaged or destroyed by an electrostatic
discharge.
Maintenance and repair on hydraulic and pneumatic equipment
may only be performed by specially trained personnel!
Disconnect equipment from air supply, prior to repair of
pneumatic or hydraulic equipment.
Provide regular preventive maintenance on hoses and airlines.
Exchange hose lines, even if there is no visible damage!
(Observe corresponding requirements of the manufacturer!)
After repair and maintenance, check the following items:
• make sure all detached and re-attached connections are
solid.
• confirm that removed covers, screens or filters were re-
installed
• During disconnecting or reconnecting of an air-operated
equipment, injury may occur due to a whipping air-hose
After conclusion of maintenance or repair and prior to start of
operation, make sure to
• remove all materials, tools and other supplies needed for the
maintenance or repair from work area of the equipment
• remove leaking liquid or oils
• make sure all safety devices on the equipment work perfectly!
7
Advertisement
Table of Contents
