Operating Screwdriver with a Finder:
Installation of the Finder (optional equipment):
• Remove screw-cap (left-hand thread) from spring sleeve
• Insert finder and spring into spring sleeve
• Re-attach screw-cap onto spring sleeve (left-hand thread) and attach
complete spring sleeve package to Screwdriver
Picture: Spring sleeve cpl. 364672 A with finder and bit
Picture: Spring sleeve cpl. 364672 C
INFORMATION
Finder and bit are not included in the delivery capacity of the
spring sleeve.
You will find suitable inserting tools
•
•
in our brochure D 3320 E or
on the internet as follows:
Technology→ Selection program: Inserting tools
www.deprag.de
30
→ Screwdriving