Specifications - Christie Matrix 4000 Specifications

Mirage 4000
Brightness
• 4000 ANSI lumens
Over 90% brightness uniformity
•
Contrast Ratio (1.5-2.2:1 zoom lens)
300:1 ANSI; 800:1 Full Field
•
Resolution
• True SXGA 1280 x 1024 chip resolution
16.7 million displayable colors
•
Christie's 3-DMD™ Optical System
•
(SLIC™) featuring new Dark Metal
DMDs for improved black level and
contrast ratio
13-bit user selectable gamma table
•
Horizontal Frequency
15kHz to 120kHz
•
Vertical Frequency
24 Hz to 120 Hz
•
Dot Clock
• 160 MHz
F E AT U R E S
Christie-designed electronics provide the
•
most advanced digital signal processing
for all types of stereo images.
Field Interchangeable Optional Lenses
1.2:1 Fixed Short Throw
•
• Zoom lenses: 1.5-2.2:1, 2.2-4:1
and 4-7:1
• Fixed lens mount with horizontal
and vertical lens offset, focus and
zoom adjustment
Screen size 72" to 480" (1.8m – 12.2m)
•
diagonal image size (lens dependent)
• Compatible with VistaGRAPHX 0.8:1,
2.5-4:1, 4-7:1 with adapter
• Built-in light shutter
Lens mount tilt adjustment
•
Up to 130% of vertical lens offset
•
• Up to 80% of horizontal lens offset
Dynamic Scaling
Resizing processing for computers
•
and workstations up to 1600 x 1200
resolution
Independent horizontal and vertical
•
image size adjustment for graphics and
video
Inputs
Input 1: Analog RGB 5 BNC for
•
RGBHV, YPrPb, YCbCr and YUV
Input 2: Optional plug-in
•
input modules
Separate, composite sync and sync-
•
on-green compatible
HDTV Tri-level sync compatible for all
•
known HDTV formats
Stereoscopic Source Compatibility
• Active stereo SXGA with vertical
refresh rates up to 108Hz with one
field delay, without frame dropping
• In 3D mode, horizontal frequency:
111kHz maximum
Note: in 3D mode, inputs must be in RGB
or Digital Flat Panel (Optional module)
Copyright 2002 Christie Digital Systems, Inc.. All rights reserved. All brand names and product names are trademarks, registered
trademarks or tradenames of their respective holders. Canadian manufacturing facility is ISO 9001 certified. MIL5001
July 02-NA

Specifications

•
Enhanced Feature Set
• Constant brightness tracking
(LiteLOC™ - Light Output Control)
• Variable lamp power from 450 to 700W
Brightness uniformity control
•
Intuitive on-screen display (OSD)
•
• Service functions can be
password protected
• Multiple language support
100 channel memories
•
®
Built-in Stereo 3D interface module
•
• Primary Color Adjustment (PCA™)
Dark Interval Adjustment (DIA™)
•
• Auto set-up feature
Control/Networking
Auto power-up
•
Dual RS232 and dual RS422
•
communication port
IR Remote keypad
•
• Front and rear IR receiver
Optional 2-way controller RS422
•
Built-in backlit keypad
•
Auto set-up and intuitive on-screen
•
display for ease of use.
Lamp Specification
®
700W CERMAX Xenon lamp
•
• Color temperature range 3200K
to 9300K
Over 1000 hours of lamp life
•
• User replaceable lamp
Pre-aligned lamp module
•
Power Requirements
Voltage range: (auto-switching)
•
AC 100-220V +/- 10%
Line frequency: 50 - 60 Hz nominal
•
• Power consumption: 1150W maximum
In-rush current rating: 50A maximum
•
• Current rating: 11.5 Amps maximum at
100VAC
Thermal dissipation: 3950 BTU/hr
•
Environmental
• Operating temperature: 0 - 35° C
Operating humidity: 20 - 80%
•
non-condensing
Diagnostics
• Built-in diagnostics LCD display
indicates operational status and
error messages
Power and status LEDs
•
Full diagnostics through RS232
•
9-pin D connector
Size and Weight
88 lbs (39.9 kg)
•
24.48" W x 30.19" L x 11.88" H
•
• 64.8cm W x 76.7cm L x 30.2cm H
Standard Accessories
IR wireless remote (with 4AA batteries)
•
8' line cord
•
• User manual with warranty card
Optional Accessories
• Wired two-way remote controller
(RS422) with LCD display
• Remote IR sensor
Replacement lamp module
•
Multi-standard video decoder (NTSC
•
3.58, NTSC 4.43, PAL, PAL 60, PAL M,
PAL N, SECAM)
• DVI/DFP module
Digital HDTV module (SMPTE 292)
•
Vista compatible analog input modules
•
• Compatible with selected third
party switchers
• Service manual
Librarian communication software
•
• Arbitrary Gamma Table Software
Wired remote backlit keypad
•
Motorized lens mount upgrade
•
• Serial Digital Input (SMPTE 259M / CCIR 601)
10-bit ADP (Advanced Digital Processing)
•
used in non-stereo mode
Transit case
•
Fixed lens mount with horizontal
•
and vertical lens offset, focus and
zoom adjustment.
Regulatory Approvals
Safety: CSA C22.2 No. 950, UL 1950,
•
EN609050 European Norm "Safety of
Information Technology Equipment"
Complies with relevant worldwide EMC
•
and safety standards
The product complies with FCC Class A
•
and EN55022 Class A requirements
This product conforms to all relevant
•
European directives, standards, safety,
health and environmental concerns and
bares the CE marking
Warranty
• 1 year parts and labor
Accessories: One year
•
Due to constant research,
specifications are subject to
.
change without notice
Head Offices
USA
10550 Camden Drive
Cypress, CA 90630
PH: +714-236-8610
FX: +714-503-3385
Toll free: (800) 407-7727 (NA only)
sales-us@christiedigital.com
CANADA
809 Wellington Street North
Kitchener, Ontario N2G 4Y7
PH: +519-744-8005
FX: +519-749-3136
Toll free: (800) 265-2171 (NA only)
sales-canada@christiedigital.com
Branch Offices
UNITED KINGDOM
PH: +44 118 977 8000
FX: +44 118 977 8100
sales-europe@christiedigital.com
SINGAPORE
PH: +65 6877-8737
FX: +65 6877-8747
sales-singapore@christiedigital.com
FRANCE
PH: +33 (0) 1 47 48 28 07
FX: +33 (0) 1 47 48 26 06
Mobile: +33 (0) 6 76 47 43 62
sales-france@christiedigital.com
GERMANY
PH: +49 2161 664540
FX: +49 2161 664546
sales-europe@christiedigital.com
CHINA
PH: +86 21 6278 7708
FX: +86 21 6278 7707
sales-china@christiedigital.com
WWW.CHRISTIEDIGITAL.COM