Connecting to the SC5000 System Controller (Optional)
In larger scanning arrays (scanning tunnels), an SC5000 controller can act as the
system master and support up to 31 slave DS8110/DX82110 barcode scanners
in an Ethernet-based connection loop (EBC). SC5000 wiring connections are
made to the front and bottom connector panels. In most applications, the cable
connections to the scanner will include:
1. CFG (Configuration via laptop Ethernet cable)
2. HOST
3. ETH 1 (EBC scanner network)
4. ETH 2 (EBC scanner network)
5. POWER
6. I/O (Connects directly to the 25-pin D type connector on the CBX connec-
tion box)
7. ENC (PNP Encoder/Tachometer)
8. TRG (PNP Trigger/Photoelectric Sensor)
9. Water-tight connectors
Complete installation information for the SC5000 Controller is available in the
SC5000 System Controller Reference Manual
Reference Manual
CBX100 Connection Box
available at www.datalogic.com.
41