Messaging | Message Builder - Datalogic DS8100 Reference Manual

Messaging | Message Builder

Use the Message Builder window to configure Standard or Advanced system
messages.
To use the Message Builder:
1. In the menu under Modify Settings, navigate to Global Settings | Messaging
| Message Builder. The Message Builder window opens.
2. Enter the appropriate information in the form as described below:
Message Number to Modify
Select the number of the message you want to modify from the drop-down list.
Message n Item List
Idx
Displays the index number of the messages. This identifies where an item will be
located in the host message. This is the information that is placed in the message
field. it can range from free flowing text to bar code related information to package
related information
Type
Displays the message type including various Text String, Code Related Item, or
Package Related Item messages.
Qualifier
Displays relevant qualifiers for the message item if needed. This is the information
that is placed in the message field. It can range from free flowing text to bar code
related information to package related information.
Add
Click to add a message item to the bottom of the list.
Reference Manual
Messaging | Message Builder
139