Datalogic DS8100 Reference Manual page 63

Edit
Select to Remove, Reassign, Add, or Replace from the Edit drop-down list to
complete the following actions:
Remove: When selected, you can select the scanner to remove from the Dev/MAC
Address drop-down list. Click OK to remove the selected scanner from the system.
Reassign: When selected, the Dev column of the selected slave scanner (selected
with ID) presents a drop-down list of Dev numbers. Select a different number to
reassign the scanner.
These options are for units not in the cluster, that have been discovered.
Add: This is an option under the Edit drop-down list in the Unconfigured Devices
section of the screen. Click OK to add the selected device to the system.
Replace: This is an option under the Edit drop-down list in the Unconfigured
Devices section of the screen. When selected, you can select from a list of slave
scanners (Those with a gray indicator, meaning the unit is not connected) in the
system using MAC Address and Dev drop-down lists. Click OK to replace the
selected scanner with the Unconfigured Device.
3. When you have finished making changes, click Update All to save all pend-
ing changes, click Reset All to revert to all previously saved values, and click
Reset Page to revert to the previous saved values on the current page.
Reference Manual
System Information
51