5. Measure the distance for Z from the conveyor bed to the barcode, and
enter that distance in the first box under
code is laying on the conveyor bed, the value should be "0."
6. Click Calibrate 1. PackTrack data is displayed for the first code.
7. Next, place a barcode overhanging the top corner of the tallest box speci-
fied for your scanning system as shown in the illustration below. Center one
edge of the box on the conveyor and align the other edge with the laser line
as shown.
Reference Manual
. Since the bar-
Z-Coord (mm)
PackTrack™
213