Page 1
AL400ULXJ Power Supply/Charger Installation Guide For a grey enclosure add a “G” suffix to the part number Power Units Altronix Corp. 140 58th St. Brooklyn, NY 7315-1335:0100 More than just power. Rev. 030619 Installing Company: _______________ Service Rep. Name: __________________________________...
Overview: Altronix AL400ULXJ power supply converts a 115VAC, 60Hz input to a 12VDC or 24VDC output. Features: Agency Listings: Output (cont’d): • UL Listed: • 4A total supply current at 12VDC or UL294* Access Control Systems 3A total supply current at 24VDC.
Installation Instructions: Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/NFPA 72/ANSI, and with all local codes and authorities having jurisdiction. Product is intended for indoor use only. 1. Mount unit in the desired location. Mark and predrill holes in the wall to line up with the top two keyholes in the enclosure.
LED Diagnostics: Red (DC) Green (AC) Power Supply Status Normal operating condition. Loss of AC. Stand-by battery is supplying power. No DC output. Loss of AC. Discharged or no stand-by battery. No DC output. Red (Bat) Battery Status Normal operating condition. Battery fail/low battery.
Page 5
Fig. 1 CAUTION: De-energize unit prior to servicing. For continued protection against risk of electric shock and fire hazard replace fuse with the same type and rating. Do not expose to rain or moisture. 115VAC power mains non power-limited Class 1 Fig.
Appendix A - UL Listed Compatible Devices –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– A.1 Four (4) Wire Smoke Detectors Table A-1 below lists four (4) wire smoke detectors compatible with AL400ULXJ output. System Sensor Max Stand-by Alarm Current Detector Type Smoke Detector/Base Current (mA) (mA) B112LP Base 0.12...
Need help?
Do you have a question about the AL400ULXJG and is the answer not in the manual?
Questions and answers