Table of Contents
Advertisement
SF Series
15.7 Enabling/Disabling HD Voice (Default: Disable)
HD Voice allows you to communicate in high-definition during phone
calls. This feature increases the quality so that the audio will be crisp
and clear during phone call conversations. If this feature is enabled,
incoming phone calls will interrupt intercom conversations and audio
from the SR10 will not be heard during intercom conversations. Three-
Way Conference Phone Call with Intercom Participant will not be
available if HD Voice is enabled.
Note:
Refer to the manufacturer of your Bluetooth device that will be connected to
the headset to see if it supports HD Voice.
46
15.8 Enabling/Disabling HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom audio from normal
quality to HD quality. HD Intercom will become temporarily disabled
when you enter into a multi-way intercom. If this feature is disabled,
the two-way intercom audio will change to normal quality.
Note:
1. The intercom distance of HD Intercom is relatively shorter than that of
normal intercom.
2. HD intercom is active only when Audio Overlay is disabled.
15.9 Setting VOX Sensitivity (Default: 3)
VOX sensitivity can be adjusted depending on your riding environment.
Level 5 is the highest sensitivity setting and 1 is the lowest.
Advertisement
Table of Contents
