Table of Contents
Advertisement
9 CONFIGURATION SETTING
9.2
Software Configuration Setting
You can change the settings of the Bluetooth system through the Sena
Device Manager or the Sena Utility App.
9.2.1
Unit Language
You can select the device language. The selected language is
maintained even when the Bluetooth system is rebooted.
9.2.2
VOX Phone (Default: Enable)
If this feature is enabled, you can answer incoming calls by voice. When
you hear a ringtone for an incoming call, you can answer the phone
by saying a word such as "Hello" loudly or by blowing air into the
microphone. VOX phone is temporarily disabled if you are connected
to intercom. If this feature is disabled, you have to tap the (+) Button to
answer an incoming call.
9.2.3
HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom audio from normal quality
to HD quality. If this feature is disabled, the two-way intercom audio will
change to normal quality.
Note: The intercom distance of HD Intercom is relatively shorter than
that of normal intercom.
9.2.4
HD Voice (Default: Enable)
HD Voice allows you to communicate in high-definition during phone
calls. This feature increases the quality so that the audio will be crisp
and clear during phone call conversations. If this feature is enabled,
incoming phone calls will interrupt intercom conversations and audio
from the SR10 will not be heard during intercom conversations.
Note: Refer to the manufacturer of your Bluetooth device that will be
connected to the Bluetooth system to see if it supports HD Voice.
RUMBA Bluetooth Multi-sport Helmet | 23
Advertisement
Table of Contents
