Wall Mounting Instructions - Ametek Reichert Clearchart 4 User Manual

Installation, Features, & Functions

Wall Mounting Instructions

WARNING: IT IS IMPORTANT TO SAFELY SECURE THE EQUIPMENT. UNSECURED EQUIPMENT COULD
POSSIBLY BECOME DISLODGED AND FALL, CAUSING INJURY TO EITHER THE PATIENT OR EXAMINER.
WARNING: CARE MUST BE TAKEN TO ARRANGE THE CABLES FOR THE ACCESSORIES SUCH THAT
THEY DO NOT PRESENT A TRIPPING HAZARD TO THE EXAMINER OR A DANGER TO THE PATIENT.
WARNING: POSITION THE CLEARCHART 4 ON THE WALL SO THAT IT IS NOT DIFFICULT TO OPERATE
THE DISCONNECTION DEVICE (PLUG).
Note: Make sure the position you choose to mount your ClearChart 4 is within the reach of a power
outlet.
Direct-Throw: Your ClearChart 4 must be positioned at patient eye level directly in front of the
patient. The minimum test distance is 6 feet (1.83 meters) with a maximum test distance of 31 feet
(9.5 meters). Refer to the Direct Throw illustration in this section.
Mirror Arrangement: A first surface mirror is a useful space-saving device to increase the patient
testing distance when the room does not permit a direct-throw arrangement. Typically, your ClearChart
4 will be positioned higher than patient eye level so that the examiner will not interfere with the patient's
view of the ClearChart 4. Arrange the ClearChart 4 and mirror so that the ClearChart 4 can be seen by
the patient through the mirror.
1. Find an appropriate spot on the wall that will support the ClearChart 4, which will hang from the
VESA compliant Mounting Bracket. Ensure that the refraction distance meets the requirements
for either Direct Throw or Mirror Arrangement.
2. Level the supplied Wall Mount Bracket and mark the holes on the wall. The mount should be
installed in solid wood stud, brick or concrete wall.
3. Hang the ClearChart 4 by lining-up the holes on the back of the device with the four holes on the
mounting bracket. Secure the ClearChart 4 to the mounting bracket with the 4 screws provided.
13795-101 Rev. J
(continued)
9