Application Of Input Power; Disconnection Of Input Power - Ametek Reichert Clearchart 4 User Manual

Installation, Features, & Functions

Application of Input Power

1. Using the provided power cord, insert the female end into the power input receptacle located at the
bottom of the instrument. Refer to Figure SU-18.
2. Plug the male end of the power cord into a wall outlet of the appropriate voltage. Input voltage must
not exceed the range listed in the Specifications section of this manual.
3. Set the ON / OFF switch to ON ( I ).

Disconnection of Input Power

At any time, the power switch can be set to OFF. The unit does not have a power down sequence.
To terminate operation of the ClearChart 4, press the ON / OFF switch to the OFF position (O).
Note: If the ClearChart 4 is intended to be OFF for an extended period of time, the ClearChart 4
can be disconnected from power by detaching the power cord from the receptacle.
Note: Even though the system has a low power mode, it is recommended to shut the instrument off
at the end of the day.
16
On/Off
Switch
Figure SU-18 Power Cord and On/Off Switch
(continued)
Power
Cord
13795-101 Rev. J