Ametek Reichert Clearchart 4 User Manual page 18

Installation, Features, & Functions
(continued)
Connection with a Reichert Digital Refraction System
(continued)
Bluetooth Connection
(continued)
If using the Bluetooth serial adaptor (PN 16251), connect the Bluetooth Dongle to the end of the Null
Modem Cable. Refer to Figure SU-21.
Null Modem
Cable
Bluetooth Dongle
Figure SU-21 Connect Dongle to Cable
Connect the other end of the Null Modem Cable to the port on the bottom of the ClearChart 4. If
using the USB Power Adaptor, connect it to the USB port on the bottom. Refer to Figure SU-22.
Null
Modem
Cable
USB Power
Adaptor
Figure SU-22 Connect USB Power and Null Modem Cable
If using an A/C power adaptor, plug the adaptor to a properly volted outlet. Connect the power cord
to the Bluetooth Dongle. Refer to Figure SU-23.
Bluetooth Dongle
Power Cord
Figure SU-23 Connect Dongle to Power
18
13795-101 Rev. J