Ametek Reichert Clearchart 4 User Manual page 26

Installation, Features, & Functions
Remote Control Functions
This button will momentarily display the current size of the smallest
SIZE
optotypes displayed on the screen on the bottom right hand corner of
the screen.
Note: This button only works if you have the DISPLAY OPTOTYPE
This is the LEFT arrow button. Pressing the LEFT arrow button will
randomize the optotypes on the screen. The LEFT arrow button is
also used to select options during the initial setup of the ClearChart 4,
as well as making selections in the menu screen.
This is the UP arrow button. Pressing the UP arrow button will in-
crease the size of the optotypes on the screen. The UP arrow button
is also used to select options during the initial setup of the ClearChart
4, as well as making selections in the menu screen.
This is the RIGHT arrow button. Pressing the RIGHT arrow button will
randomize the optotypes on the screen. The RIGHT arrow button is
also used to select options during the initial setup of the ClearChart 4,
as well as making selections in the menu screen.
Note: It is recommended that the RIGHT arrow button be used to
This is the DOWN arrow button. Pressing the DOWN arrow button will
decrease the size of the optotypes on the screen. The DOWN arrow
button is also used to select options during the initial setup of the
ClearChart 4, as well as making selections in the menu screen.
The MENU button presents the main menu to select default prefer-
ences for the ClearChart 4.
MENU
Once in the menu screen, use the UP and DOWN arrow buttons to
SAVE
select a menu item, and the RIGHT and LEFT arrow buttons to toggle
through options.
When you are ready to save your selection, press the SAVE button on
the remote.
26
(continued)
SIZE option on the menu turned off.
randomize single optotypes.
(continued)
13795-101 Rev. J