Table of Contents
Advertisement
Installation, Features, & Functions
Images
(continued)
Importing and Accessing Image Files (continued)
SIZE
Press the Menu button to leave the image files management screen.
MENU
Press Menu again to get back to the active display.
EDU
Press the EDU button to display the selected images and scroll through them using the
left and right arrow buttons.
Organizing Image Files
MAX
The "MAX" and "MIN" buttons on the remote can be used to move the position of an
image file in the Image List. Pressing the MAX button will move an image file up in the list
MIN
and the MIN button will move the image file down the list.
Deleting Image Files
SIZE
Image files may be deleted by pressing the MENU and EDU buttons in sequence to open
MENU
up the image file management display.
EDU
Select "Image Files" using the up/down arrow and press the right arrow button to open
the list. Select the image file you wish to delete using the up/down arrow buttons. Press
the button in the lower right corner of the remote control to delete the image file.
Note: The Reichert education slides may be deactivated but cannot be deleted from the
Changing the Screen Saver
SIZE
Insert the USB drive that contains the new screen saver logo into one of the USB ports on
MENU
the bottom of the instrument. The screen saver logo file must be in JPEG format and must
be named sslogo.jpg. Go to the image management menu using the MENU and EDU
EDU
buttons and select the "Screen Saver Logo" option. Three selections, accessible with the
left/right arrow buttons, will be displayed:
Note: The "Logo" option displays the screen saver image most recently selected,
Use the Right arrow button to scroll to the "New" option. The following message will be
displayed: "Press down arrow to read logo file from USB device".
Press the down arrow and the new logo image file will be copied to the hard drive of the
ClearChart 4X. After copying the file, you will be returned to the image file management screen.
34
image file list.
Logo
Default
New
whether it was a new image that was imported or the ClearChart 4X default
screen saver. The "Default" selection displays the ClearChart 4X default screen
saver image. The "New" option allows a new screen saver image to be imported
into the device.
(continued)
13795-101 Rev. J
Advertisement
Table of Contents
