Table of Contents
Advertisement
Instrument Setup
Unpacking Instructions
Great care has been taken to deliver your new Reichert 7 Series Chinrest to you safely. Please read the
User's Guide before operating the unit.
Remove the following contents from its box.
•
Chinrest Assembly
•
Hardware Package
•
User Guide (P/N 16049-101)
•
Up/Down Switch (P/N 16049-815*)
(*Note: maximum length not to exceed 36 inches (92.0 cm)
Parts Identification
(Refer to Figure 1-1)
1. Chinrest Assembly: Chinrest that the patient can use as a support during measurements.
2. Chinrest Mounting Bracket: Bracket of the Chinrest that attaches to the underside of the Reichert 7.
3. Mounting Hardware: Hardware for the Chinrest and switch.
•
4 screws:
(attaches the chinrest mounting bracket to the unit)
•
3 rubber pads (optional use):
(attaches to the bottom of the switch)
•
1 hook-and-loop fastener (optional use):
(attaches to the bottom of the switch on the Reichert 7)
4. Up/Down Switch: Toggle Switch that moves the Chinrest up or down.
2
3
Figure 1-1, Parts Identification
6
1
4
16049-101 Rev. D
Advertisement
Table of Contents
