Switching Off The Appliance; After Each Use; Changing The Clock Time; Automatic Programmes - Bosch HMT85DL53B Instruction Manual

Switching off the appliance

ã=
Risk of scalding!
Hot steam may escape when the appliance door is opened.
Open the appliance door carefully during or after cooking.
When opening, do not stand too close to the appliance. Ensure
that, depending on the temperature, steam is not visible.
Press and hold the n button to cancel the cooking operation.
When the cooking time has finished, the cooking operation
automatically ends and a signal sounds.
Press the # button to switch off the appliance. Open the
appliance door carefully.
The cooling fan may continue running when you open the
appliance door.

After each use

Emptying the water tank.
Empty the water tank after each use:
Pull the water tank out of the appliance slowly, keeping it
1.
horizontal, so that no remaining water can drip out of the
valve.
Empty out the water.
2.
Thoroughly dry the water tank and the tank recess in the
3.
appliance.

Automatic programmes

You can prepare food really easily with 20 different
programmes.
In this section, you will find out
how to set one of the automatic programmes
■
hints and tips on the programmes
■
which programmes you can set
■

Setting a programme

Select the correct programme from the programme table.
Follow the instructions for the programmes.
Press the button to switch on the appliance.
#
1.
Press the button.
`
2.
The first programme
˜ ‚

   


appears in the display.

Drying the cooking compartment
ã=
Risk of scalding!
The water in the evaporator dish may still be hot. Allow it to cool
before wiping.
Leave the appliance door ajar until the appliance has cooled
down.
Use the enclosed cleaning sponge to empty the evaporator
dish after every cooking operation. Otherwise, the dish may
overflow during the next cooking operation.
Wipe the cooled cooking compartment and the evaporator dish
with the enclosed sponge and dry well with a soft cloth.
Wipe units and handles dry where condensation has built up.

Changing the clock time

No cooking time should be set.
Press the 0 button.
1.
The [ ] symbol appears in the display.
0
Change the time with the rotary selector.
2.
Press the 0 button.
3.
The change is applied.
You can hide the clock. It is then only visible when the
appliance is switched on (see section: Basic Settings).
Turn the rotary selector to set the required programme.
3.

   


Press the f button.
4.
A default weight appears in the display.
If a signal sounds, you do not need to enter a weight for this
programme.

   




9