Switching On The Appliance - Bosch HMT85DL53B Instruction Manual

Switching on the appliance

Press the button to switch on the appliance.
#
1.

 


The preferred temperature of 100° and the preferred cooking
time [ ] of 20 minutes appears in the display.
r
Press the temperature button to select a temperature (for
2.
more information about dishes and meals, see section:
Tables and tips).
Button Used for
40 °C e.g. for proving dough and
defrosting
60 °C e.g. for defrosting
80 °C e.g. for fish and sausages
90 °C e.g. for fish, sausages and extra
soup ingredients
100 °C e.g. vegetables, fish, meat and
side dishes, for juice extraction
and preserving
The appropriate default time appears in the display.

  
 
 
Turn the rotary selector to set a cooking time (max. 2 h).
3.

   


8
         
Default cooking
time
30 minutes
20 minutes
20 minutes
20 minutes
20 minutes
 

Press the n button.
4.
    
The appliance heats up.
The cooking time does not start counting down until after the
heating-up time.
Changing the temperature
You can change the temperature at any time. To do this, press
the required temperature button:
If you have selected a lower temperature, the cooking time
■
continues counting down without interruption.
If you have selected a higher temperature, the cooking time
■
does not continue counting down until after the heating-up
time.
If you press a temperature button twice, the current cooking
operation is cancelled. The preferred temperature of 100 °C
and cooking time of 20 minutes appear in the display. Press
the button to start.
n
Changing the cooking time
You can change the cooking time at any time. Turn the rotary
selector to set a new cooking time. After a few seconds, the
change is automatically adopted.
Stops (pauses) operation
Press the button briefly to pause operation. The cooling fan
n
may continue to run. To start, press the
If you open the appliance door during operation, this pauses
operation. To start, close the appliance door and press the
button briefly. If you have switched on the basic setting
"Continue operation after closing door", restarting is not
required (see section: Basic settings).
Fill water tank indicator Ë
If the water tank is empty, a signal sounds and the
appears. Operation is stopped.
Open the appliance door carefully. Steam will escape.
1.
Remove the water tank, fill it with water and reinsert it.
2.
Press the n button briefly.
3.
If you have switched on the basic setting "Continue operation
after closing door", restarting is not required (see section:
Basic settings).
Note: If there is no more water in the tank, you will hear a loud
pumping sound until the evaporator dish has boiled dry. Only
then will appear and the signal will sound.
Ë
When this happens, pause cooking and refill the tank (see:
Pausing operation).
button again briefly.
n
n
symbol
Ë