Table of Contents
Advertisement
Operating the appliance
en
Keep the kitchen ventilated while the appliance is
7.
heating.
Use the on/off button ÿ to switch off the appliance
8.
once the specified time has elapsed.
Wait for the cooking compartment to cool down.
9.
Clean the smooth surfaces with soapy water and a
10.
dish cloth.
Empty the water tank and dry the cooking
11.
compartment. ~ "After every steam operation"
on page 20
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
1Operating the appliance
Y ou have already learnt about the controls and how
O p e r a t i n g t h e a p p l i a n c e
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
The childproof lock and the timer can also be set
Note:
when the appliance is switched off. Certain displays and
notes, such as those relating to the residual heat in the
cooking compartment, remain visible on the display
after the appliance has been switched off.
Switch off your appliance when you do not need to use
it. If no settings are applied for a long time, the
appliance switches itself off automatically.
Switching on the appliance
Press the ÿ On/Off button to switch on the appliance.
The Bosch logo appears on the display, followed by the
selection list for the types of heating.
In the basic settings, you can specify which
Note:
operating mode should appear after the appliance is
switched on. ~ "Basic settings" on page 26
Switching off the appliance
Press the ÿ On/Off button to switch off the appliance.
Any functions that may be running are cancelled.
The time, or if applicable, the residual heat indicator,
appears on the display.
You can set whether or not the time should be
Note:
displayed when the appliance is switched off in the
basic settings. ~ "Basic settings" on page 26
16
Starting the operation
You must press the l Start/Stop button to start each
operation.
After starting the appliance, the time display is shown
on the display along with the settings. The display ring
and the heating line also appear.
Pausing the operation
You can also interrupt and then continue an operation
using the l Start/Stop button.
If you press and hold the l Start/Stop button for
approx. 3 seconds, the operation is cancelled and all
settings are reset.
The fan may continue to run after an operation
Note:
has been paused or cancelled.
Selecting an operating mode
Once the appliance is switched on, the default
operating mode is displayed.
If you would like to select a different operating mode,
you can do so using the menu. You can find detailed
descriptions of the individual operating modes in the
corresponding sections.
The following always applies:
Touch the appropriate text field.
1.
The function is highlighted.
Turn the rotary selector to change the highlighted
2.
selection.
If necessary, apply other settings.
3.
To do this, touch the appropriate text field and
change the value using the rotary selector.
Press the l Start/Stop button to start.
4.
The appliance starts the operation.
Setting the type of heating and temperature
If the "Types of heating" operating mode has not been
selected, touch the "Types of heating" text field in the
menu. The selection list for the types of heating appears
on the touch-screen displays.
Example in the picture: Hot air eco . at 195 °C.
Touch the text field with the required type of heating.
1.
If necessary, scroll though the selection list using the
rotary selector.
The temperature is highlighted white.
Advertisement
Table of Contents
