Table of Contents
Advertisement
GB
Setting auxiliary functions dip-switches B and C
There are two dip-switches on the electronic control
panel for setting the functions of the appliance as
required.
-
Use cursor C to modify the night function logic:
-
In the ON position the ventilation is inhibited thus
letting the machine heat the room through natural
radiation or convection as happens with traditional
radiators; in the OFF position the fan functions
normally.
-
Setting B dip switch in ON is enabled, only in
CP presence contact input connection
When the contact connected to the CP (ref. A) input
is closed all the users connected will be switched off.
If the contact is open the unit is active, if the contact is
closed the unit is deactivated an by pressing a key the
symbol flashes.
14
The input cannot be connected in parallel to one of
another electronic board (use separate contacts).
B
C
A
B
C
D
ASCII
ON
RTU
LED
MOTOR
N EV1 N EV2
L
N
cooling, the continuous ventilation at the minimum
speed, even after the set point has been reached
to ensure a more regular functioning of the
temperature probe and to prevent air stratification.
Setting the cursor on OFF the function is cycled (2
minutes ON, 10 minutes OFF).
H4
H2
AIR
COMM
GRID
GRID
CP
A
CHILLER BOILER
Advertisement
Table of Contents
