Table of Contents
Advertisement
GB
SMART TOUCH electronic panel with continuous on- board modulation
This control makes the room temperature adjustment completely
autonomous (with adjustable offset via keyboard) through AUTO,
SILENT, NIGHT and MAX pictograms by means of a probe located
in the lower side of the device ensuring anti-freeze safety even
when set to stand-by.
The control panel has its own memory, therefore no settings will be
lost in case of shut-down or power outage.
The controls cannot be installed on SLI and RSI versions.
Display
The display also offers information on the statuses and on any
active alarms through 8 specific symbols:
Automatic operation
Silent operation
Maximum ventilation speed
Night function
Heating on
Key function
You can set the various functions through the 8 backlit keys:
Temp + allows to increase set temperature.
Temp - allows to decrease set temperature.
Heating / Cooling: allows switching between heating
and cooling
The ventilation speed will be adjusted automatically
between a minimum and a maximum value
20
User instructions
A
After 20 seconds from the last action the panel brightness will
be reduced to increase the comfort during night use and on
the display will appear the room temperature. Press any key to
restore maximum brightness.
A
Display
B
Keys
Cooling on
Supervision on. Flashing with CP presence contact
closed.
Alarm indication (light on)
Panel off indication
Resistance enabled indication
Night function: the ventilation speed is significantly
reduced and the set temperature is changed
automatically
Operation at maximum speed: allows setting he
maximum ventilation speed
ON/Stand-By: allows activating or putting the device
in stand-by mode.
Silent:
allows limiting the ventilation speed by
reducing its maximum value.
B
Advertisement
Table of Contents
