Table of Contents
Advertisement
13. INSTALLING BELT CLIP / SHOULDER STRAP
The belt clip and the shoulder strap convenient for carrying the printer can be attached to this printer.
The belt clip is included with the printer at the factory shipment, but is also available as an optional
accessory.
The shoulder strap and the strap attachment are optional accessories. See "21 ACCESSORIES AND
CONSUMABLE PARTS", and be sure to purchase our specified accessories listed on the reference.
Installing Belt Clip
(1) Turn off the printer.
(2) Remove the battery pack from the printer.
When the AC adapter is connected, unplug the AC plug of the AC adapter from the outlet.
(3) Insert the part "d" of the belt clip into the hole "D" of the printer in the direction of the arrow as
shown in Figure 13-1.
The belt clip cannot be installed if inserted in the wrong direction.
D
(4) Rotate the belt clip 90 degrees and level it.
Figure 13-1 Belt Clip Installation (1)
Figure 13-2 Belt Clip Installation (2)
39
d
Advertisement
Table of Contents
