Operator Call - Panasonic KX-TD816C User Manual

Station Features and Operation (DPT/SLT)

4.3.60 Operator Call

Allows you to call an operator within the system. Two extensions can be assigned as Operator
1 and 2.
Any Telephone
Lift the handset or press
SP-PHONE/MONITOR.
Conditions
• If no operator is assigned, this feature is not available and you will hear a reorder tone after
dialing the feature number.
• The call is routed to Operator 1 first. If Operator 1 is busy, then it is routed to Operator 2.
Through System Programming, it is possible to change the routing so that Operator 1 and
Operator 2 are called simultaneously when the operator is called.
Programming Guide References
[990] System Additional Information
226
0
Dial 0.
User Manual