Paralleled Telephone Connection - Panasonic KX-TD816C User Manual

Station Features and Operation (DPT/SLT)

4.3.66 Paralleled Telephone Connection

A Proprietary Telephone (PT) can be connected in parallel with a single line telephone (SLT).
This feature allows you to enable or disable SLT ringing. When a parallel connection is made,
either telephone can be used.
To enable / disable SLT ringing
PT
Lift the handset or press
SP-PHONE/MONITOR.
Conditions
• The default is "Parallel Off (No ring)".
• The PT can be used to perform normal operations whether or not the SLT is set to ring.
• When receiving a call:
—If SLT ringing is enabled, then both the PT and the SLT will ring except when the PT is
in "Hands-free Answerback" mode or Voice-Calling mode with the "Alternate Calling —
Ring/Voice" feature.
—If SLT ringing is disabled, then the PT rings but the SLT does not. However, the SLT can
answer the call.
• When the SLT is in use, the display and the indicators of the PT will work in the same way
as if the PT is in use.
• In the DPT + SLT combination, if one telephone goes off-hook while the other telephone is
on a call, the call is switched to the former.
• If you go off-hook while your paralleled telephone is in use, the call will switch over to your
telephone, and vice versa.
• The "XDP
XDP (eXtra Device Port) expands the number of telephones available in the system by allowing an extension port to contain two
*1
telephones. For more details, please consult with your dealer.
240
1
3 9
0
Dial 39. For Ring mode: Dial 1.
For No Ring mode: Dial 0.
<PT Display Example>
Parallel On
Parallel Off
" feature is available.
*1
Ring
No Ring
Confirmation
tone (optional)
— (when enabling)
— (when disabling)
Hang up or press
SP-PHONE
/MONITOR.
User Manual