Panasonic KX-TD816C User Manual page 64

Station Programming
To store a name
— Be sure that you are in the Station Programming mode: Press [PROGRAM] [9] [9].
7431 / 7433
Dial .
The STORE indicator light turns off.
The display shows the current status.
(If nothing is stored, "Not Stored" is displayed.)
<PT Display Example>
Mike Graham
CLR
desired name
Enter the name.
Refer to the Combination Tables 1 and 2 in 2.2.8 Station Speed Dialing Number/Name
Assignment [KX-T7235/KX-T7431/KX-T7433/KX-T7436 only] for information on how to
enter each character.
— To exit the Station Programming mode: Press [PROGRAM] or lift the handset.
Combination Table
Each character can be entered by using the dial key pad, various buttons or the Jog Dial for
storing names.
Combination Table 1 shows the combination of the keys and the number of times to press the
SELECT (AUTO ANSWER/MUTE) button, or the combination of the key and the SHIFT and
Soft buttons to enter each character. (The AUTO ANSWER/MUTE button becomes the
SELECT button when using the overlay.)
To enter a character, find the key and number of times to press the SELECT button or the
corresponding SHIFT and Soft button combination from the table. Press the corresponding key
first, then press the SELECT button the required number of times. Or you can use the SHIFT
button and a Soft button (S1 through S3) instead of the SELECT button.
64
station speed dial no.
Enter a station speed dial
number (0 through 9).
(- Name is now
programmed.)
NEXT
AUTO DIAL
STORE
Press STORE.
The STORE indicator lights.
The display shows the initial
programming mode.
NEXT
S 1
S 2 S 3
Press NEXT (S3) or MODE.
- NEXT(S3) button: for KX-T7433 users
- MODE button: for KX-T7431 users
MODE
or
User Manual