Table of Contents
Advertisement
Programming
Display PT
0
0
2
Dial 002.
<PT Display>
002 SYS SPD NAME
Repeat these steps
name
Enter a name.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR
and enter the new name.
<To end:>
END
Press END.
Conditions
• Speed dial numbers are programmed in program [001] "System Speed Dialing Number
Set."
• Each name has a maximum of 10 characters.
• For entering characters, see 2.2.8 Station Speed Dialing Number/Name Assignment [KX-
T7235/KX-T7431/KX-T7433/KX-T7436 only].
User Manual
NEXT
Press NEXT.
<PT Display>
SPD Code?→
<To continue:> [When SELECT is pressed]
STORE
Press STORE.
Press NEXT or
PREV or SELECT.
speed dial no.
Enter a speed dial number
(000 through 499).
To enter speed dial number 000,
you can also press NEXT.
<PT Display Example>
000:Not Stored
NEXT
speed dial no.
Enter the desired speed
PREV
dial number
(000 through 499).
SELECT
User Programming
83
Advertisement
Table of Contents
