Table of Contents
Advertisement
Station Features and Operation (DPT/SLT)
4.3.55 Night / Day (Lunch / Break) Service
This system supports both the night and day modes of operation. The day mode includes the
lunch and break modes. The system operation for originating and receiving calls can be
changed depending on the mode. You can transfer received outside calls to assigned extension
groups while in the lunch or break mode. Toll restriction calls can be programmed to prevent
unauthorized toll calls at night. The Day/Lunch/Break/Night modes can be switched manually
at any desired time by a pre-assigned extension user, operator or manager. The operator or
manager can perform the operation using the display.
If the Night button is assigned, its lighting patterns and status are as follows.
Off: Day/Lunch/Break mode
Red: Night mode
Switching the mode (Display operation)
7235 / 7436
Features
Press Features.
0
Day Mode
1
Night Mode
2
Lunch Mode
3
Break Mode
Enter the desired mode
number (0 to 3).
• The display shows the current mode.
210
OR
NEXT
Rotate Jog Dial or
press NEXT until the
following is displayed.
Confirmation tone
Night On/Off (→0-3)
Press Night On / Off button.
.
Hang up or press
SP-PHONE.
User Manual
Advertisement
Table of Contents
