Panasonic KX-TD816C User Manual page 158

Station Features and Operation (DPT/SLT)
To talk to the original party while holding the third party
SLT
Flash the hookswitch.
To put both parties on hold
PT
HOLD
Press HOLD.
• This feature is only available when at least one party is on an
outside line.
Conditions
• Up to six conference calls are allowed simultaneously.
• Executive Busy Override, Privacy Release
A 3-party conference call is also established by Executive Busy Override or Privacy
Release.
• Confirmation tone
When a 2-party call is changed to a 3-party conference call or vice versa, a confirmation
tone is sent to all three parties. Eliminating the tone is programmable.
<PT>
• Pressing a CO button which is not in the conference, allows you to exit from the
conference leaving the other two parties connected unless they both are on outside lines.
If they both are on outside lines, they will be disconnected.
• You can return to the original party before the third party answers by pressing the
TRANSFER button.
• CONF button is not provided on your KX-T7250. However, it can be assigned to a
flexible (CO, DSS, PF) button by Station, User or System Programming.
<SLT>
• You can return to the original party before the third party answers by flashing the
hookswitch.
<ISDN Telephone>
• This feature is not available for ISDN telephones.
158
Confirmation tone Talk to the original party.
(optional)
User Manual