Table of Contents
Advertisement
WARNING
WHEN TILTING KETTLE FOR PRODUCT
TRANSFER:
1) WEAR PROTECTIVE OVEN MITT
ANDPROTECTIVE APRON.
2) USE DEEP CONTAINER TO CONTAIN
AND MINIMIZE PRODUCT SPLASHING.
3) PLACE CONTAINER ON STABLE,
FLAT SURFACE, AS CLOSE TO
KETTLE AS POSSIBLE.
4) STAND TO LEFT OR RIGHT OF KETTLE
WHILE POURING — NOT DIRECTLY IN
POUR PATH OF HOT CONTENTS.
5) POUR SLOWLY, MAINTAINING CONTROL OF
KETTLE AT ALL TIMES, AND RETURN KETTLE
BODY TO UPRIGHT POSITION
AFTER CONTAINER IS FILLED OR
TRANSFER IS COMPLETE.
6) DO NOT OVERFILL CONTAINER. AVOID
DIRECT SKIN CONTACT WITH HOT
CONTAINER AND ITS CONTENTS.
WARNING
AVOID ALL DIRECT CONTACT WITH HOT
SURFACES. DIRECT SKIN CONTACT COULD
RESULT IN SEVERE BURNS.
AVOID ALL DIRECT CONTACT WITH HOT
FOOD OR WATER IN THE KETTLE. DIRECT
CONTACT COULD RESULT IN SEVERE BURNS.
TAKE SPECIAL CARE TO AVOID CONTACT
WITH HOT KETTLE BODY OR HOT PRODUCT,
WHEN ADDING INGREDIENTS, STIRRING OR
TRANSFERRING PRODUCT TO
ANOTHER CONTAINER.
CAUTION
KEEP FLOORS IN FRONT OF THE
KETTLE SPILLS OCCUR, CLEAN AT
ONCE TO AVOID SPILLS.
WARNING
AVOID ALL DIRECT CONTACT WITH HOT
SURFACES. DIRECT SKIN CONTACT
COULD RESULT IN SEVERE BURNS.
AVOID ALL DIRECT CONTACT WITH HOT
FOOD OR WATER IN THE KETTLE. DIRECT
CONTACT COULD RESULT IN SEVERE BURNS.
Use Of Common Accessories
A.
Lift-Off or Counterbalanced Cover
As with stock pot cooking, an optional cover can speed up the heating of water
and food products. A cover helps retain heat and reduces the heat and humidity
released into the kitchen. Using a cover can reduce some product cook times
and help maintain the temperature, color and texture of products being held or
simmered for longer periods.
Be sure the handle is secure on the lift-off cover before using. ALWAYS use the
handle to place or remove cover from the kettle. Wear protective oven mitts and
a protective apron.
When putting a lift-off cover on the kettle, position it on top of kettle rim, with its
flat edge facing the pouring lip.
When removing the lift-off cover:
1.
Firmly grasp the handle.
2.
Lift rear edge (farthest from operator) 1- 2" (3-5 cm) to allow steam and
water vapor to escape the cooking vessel. Wait 2-3 seconds.
3.
Tilt cover to 45-60° angle to allow any hot condensate or product to roll off
cover back into kettle.
4.
Remove cover, ensuring that any remaining hot condensate or product
does not drip on operator, floor or work surfaces.
5.
Place cover on safe, flat, sanitary, out-of- the-way surface, or return to
kettle.
Operation
OM-40ES-KLT
9
Advertisement
Table of Contents
