Bluetooth Speaker - Hover-1 RANGER PRO Operation Manual

Hide thumbs

Table Of Contents

Table of Contents

The hoverboard has a powerful built-in wireless speakers so you can

play your music while riding.

PAIRING THE SPEAKER

1) Turn on your hoverboard and the speakers will "Ping" to announce

that it's waiting for a Bluetooth

hoverboard speaker is now in pairing mode.

2) Place the hoverboard and the Bluetooth

would like to pair it within the operating distance. We recommend

keeping the two devices no further than 3 feet apart during pairing.

3) Ensure Bluetooth

to manufacturer's instructions for how to enable Bluetooth

device.

4) Once you have activated Bluetooth

option "H1-RGPRO" from the list of available Bluetooth

5) If required, enter the PIN code "000000" and confirm the entry.

6) The hoverboard will say "Paired" when successfully paired.

7) Please note, pairing mode on the hoverboard will last for two

minutes. If no devices are paired after two minutes, the hoverboard

speaker will automatically return to standby mode.

8) If pairing is unsuccessful, turn off the hoverboard first and re-pair

following the aforementioned steps.

9) If your smart phone is out of range, or the battery is low on your

hoverboard, your speaker may disconnect from your smart device,

and the hoverboard will say "Disconnected." To reconnect, follow

the aforementioned steps, or recharge your scooter.

NOTE: Once you have paired the hoverboard speaker with a device,

the speaker will remember this device and will pair automatically

when the device's Bluetooth

need to re-pair any previously connected devices.

Your scooter can pair up to two multi-point devices. You can

reconnect a previously paired device without going through the

pairing or PIN process on up to two devices.

LISTENING TO MUSIC

Once the hoverboard Bluetooth speaker is paired to your device,

you can stream music wirelessly through it. Only one speaker will play

music as the other speaker is strictly for safety alerts from your Hover-1.

Select the track you wish to listen to on your device to listen via the

speaker. All volume and track controls will be made using your music

device. Should you encounter any problems while streaming, please

refer to your device's user manual.