Main Menu - ProHD DT-N21H Instructions Manual

Main Menu

Picture Function
Setting for the picture quality.
Item
Exit
Contrast
Brightness
Saturation
Sharpness
Hue
Backlight
Color Temperature
Adjusts the R/G/B Gain and Bias, and Gamma Preset
Item
Exit
Gamma
Color Temp
Red Gain
Green Gain
Blue Gain
Red Bias
Green Bias
Blue Bias
Only "Color Temp" is set to "User", the Red/Blue/Green Gain or Red/Blue/Green Bias can be adjusted
Function Key
Set short-cut functions for F1-F4
Item To do
Exit Return Main Menu
F1
F2
Assign functions to the function
F3
keys F1 - F5 on the front key board
F4
F5
For example: Set F3 to "Flip Mode" under "Function key" submenu. User can press F3 on the front panel to adjust the parameters of
"Flip Mode", and the "Flip Mode" will change and follow the sequence: H Flip →V Flip→H/V Flip →Off .
ABCDEF
Off（normal）
GPI
Setting functions for external control
Item To do
Exit Return Main Menu
Enable GPI control
GPI Control*1
1 Pin
2 Pin
Assign functions to the GPI
3 Pin
terminals
4 Pin
5 Pin
6 Pin
*1 When "GPI control" is set to "On", the monitor can be operated through external GPI control unit.
Example 1: Under "GPI " submenu, set "GPI control" to "On", set "2 Pin" to "Red Tally", when the pin 2 of the extenal GPI control unit is
Example 2: Under "GPI " submenu, set "GPI control" to "On", set "6 Pin" to "Scan Mode", when the pin 6 of the extenal GPI control unit is
connected with ground, the Scan mode will change and follow the sequence: "Normal" →"Overscan"→"Native" .
To do
Return Main Menu
Adjusts the contrast of the display.
Adjusts the brightness of the display.
Adjusts the saturation of the display.
Adjusts the sharpness of the display.
Adjusts the hue of the display.
Adjusts the backlight of the display.
To do
Return Main Menu
Select the Gamma correction value.
Select the color temperature Mode.
Adjusts the Red Gain
Adjusts the Green Gain
Adjusts the Blue Gain
Adjusts the Red Bias
Adjusts the Green Bias
Adjusts the Blue Bias
Setting value
Audio Bar, False Color, AFD, H/V Delay, R/G/B/Mono,
Marker , Color Bar, UMD, Audio Alarm, Focus Assist ,
Aspect Ratio , Scan Mode, Zoom Mode, Mute, Freeze Frame,
Flip Mode ,CVBS, YPbPr ,VGA , Color Temp, Time Code, Zebra.
A B C D E F
F E D C B A
H Flip V Flip
Setting value
ON, OFF
Red Tally, Green Tally, Yellow Tally, Aspect Ratio, Scan Mode,
Zoom Mode, Mute, Freeze Frame, Flip Mode, Color Temp,
Time code, Zebra, Audio Bar, False Color, AFD, H/V Delay,
R/G/B/Mono, Marker , Color Bar, UMD, Audio Alarm, Focus Assist
Setting value
2.2 (equivalent to Υ 2.2)
2.4 (equivalent to Υ 2.4)
2.6 (equivalent to Υ 2.6)
5600K、6500K、9300K、User
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
0 to 255
H/V Flip
Setting value
0 to 100
0 to 100
0 to 100
0 to 100
0 to 100
0 to 100
11