Related Manuals for ProHD DT-X7HUx2
Summary of Contents for ProHD DT-X7HUx2
- Page 1 Model: DT-X7HUx2 Dual 7-inch Full HD Rack Mount LCD Monitor 3G-SDI & 4K-HDMI2.0 User Manual Ver：A Please read this User Manual throughout before using.
-
Page 2: Maintenance
Preface 1. All internal technologies of this product are protected, including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. 2. All brands and trademarks are protected and other relative trademarks in this user manual are the property of their respective owners. - Page 3 Maintenance Warning 1. In order to reduce the risk of fire and electrical shock, do not lay this product in rain or damp places. 2. Please keep away from the strong magnetic field; it may cause the noise of the video and audio signals.
-
Page 4: Table Of Contents
2. LCD protective film 3. Power cable Introduction DT-X7HUx2 is a dual 7-inch monitor for 19-inch rack mount, with 1920×1200 resolution and 3GSDI + 4K HDMI2.0 input, and 16-ch audio meters, de-log 3DLut, GPI controlled TALLY light etc. Features: ◆ 2K/3G/HD/SD-SDI input & loop output ◆... -
Page 5: Operation Instructions
Operation Instructions ·Front Panel (1) TALLY Light: Red, Green and Yellow 3-color TALLY indicator (2) MENU/ENTER (Main menu settings) When the menu is inactivated, presses “MENU/ENTE” to turn on the main menu on the left top of the screen; Rotate the knob, select corresponding submenu; the corresponding item is highlighted in yellow; Press the knob, enter the submenu;... -
Page 6: Back Panel
·Rear Panel (1) Fan (2) Video Signal Interface GPI: TSL UMD&GPI control socket USB: For firmware upgrade HDMI-IN: HDMI input (HDMI-A connector) HDMI-OUT: HDMI loop through output from HDMI-IN (HDMI-A connector) SDI-IN1: 3G/HD/SD SDI input (BNC connector) SDI-IN2: 3G/HD/SD SDI input (BNC connector) SDI-OUT: 3G/HD/SD SDI output (BNC connector);... -
Page 7: Osd
·OSD (1) Time code Under SDI input, it can display Time code. If no Time code information is detected, it will be displayed as “TC: UNLOCKED”. (Can be assigned to F1-F4 function key to turn on/off.) (2) UMD Display the source title. Set up the UMD under ‘UMD” submenu. (3) On-screen TALLY Display Red/Green TALLY signals together with the TALLY light (4) AFD... - Page 8 Audio and Video Analysis Functions 16-ch embedded audio meters Under 3G/HD/SD SDI, it displays 16 channels embedded audio meters. Under HDMI, it displays 2 channels embedded audio meters. The audio meter is green, and will turn yellow when audio exceeds -20dB, and turn red when audio exceeds -9dB.
-
Page 9: Main Menu
Main menu DT-X7HUx2 has OSD to adjust the parameters and settings, for example: Picture, color temp., function keys, etc. 1. Press “MENU/ENTER” button, the main menu will popup from the left top of the screen. The selected main menu highlights in yellow. - Page 10 Submenu (the default values are marked with underline) 1. Exit & Status Displays the current status, the details are as down below: *1 Display the current video signal and format *2 Display the current function keys setup 2. Picture To adjust picture parameters Color Temp To select different color temperature or setup user-defined color parameters.
- Page 11 4. Function key To define the F1～F4 function keys *1 Function keys F1-F4 can be set as the down below functions: Time code, Zebra, Audio Bar, False Color, AFD, H/V Delay, R/G/B/Mono, Marker, Color Bar, UMD, Audio Alarm, Max backlight, Focus Assist, Aspect Ratio, Scan Mode, Zoom Mode, Mute, Freeze Frame, Flip Mode, Color Temp.
- Page 12 6. UMD Set “UMD”: ⑴ Select “Source ID” (2) The underline flashes as a reminder on the bottom of the first letter. Revolve "MENU" to select the letters; the letter will follow the sequence of the down below if clockwise revolved: (3) Press “MENU”...
- Page 13 8. Audio *1 When “Bar Frame” is set to “Off”, only the audio meter will be displayed. When “Bar Frame” is set to “On”, frame and real-time audio value will be displayed. *2 Select Channel Under HDMI signal, channel1-2 can be selected. Under SDI signal, channel 1-2, 1-8 and 1-16 can be selected.
- Page 14 HDMI. When set to “No”, update model will not be supported. *2 Logo When powered on, the screen will display ProHD logo. *3.*4 Update Driver/ Kernel (1) Download latest firmware files and copy to USB stick root directory.
- Page 15 11. Color Measurement *1 Camera Log conversion When shooting with Log mode of the camera, you can select the corresponding Log conversion LUT, to convert the log mode video to standard ITU Rec.709 mode to monitor. A”User-Log” is provided for user defined LUT converting to Rec.709.
- Page 16 12. OSD 13. Key Inhibit When the “Key inhibit” is set to “on”, there is no response when all the buttons except ” MENU/ENTER” is pressed, the sreen will be displayed as ” Key Inhibit”. User can set “Key inhibit” to off under the “Key inhibit” submenu, restore the function of all keys.
-
Page 17: Specification
Specification LCD Performance Size 7 inch×2 Display area 151.2×94.5 mm×2 Resolution 1920×RGB×1200 Color Depth 8 bit Aspect ratio 16:9∕4:3 Brightness 400 nits Contrast 1000:1 Viewing angle Horizontal / Vertical: 160°∕160° Input/Output BNC×2 3G/HD/SD-SDI input ×2 Input HDMI×1 HDMI 2.0 input (Each LCD) BNC×1 3G/HD/SD-SDI loop output... -
Page 18: Trouble-Shooting
Trouble-shooting Symptom Possible causes Solution Please check if the power is connected, and then The power is not turned on press ”POWER” button to turn on the monitor Unstable power voltage Reconnect to power supply No display BNC or HDMI cable loose Check and correctly connect the contact or not correctly BNC or HDMI cable... - Page 19 This model is manufactured, warranted and supported by SWIT Electronics Co., Ltd. and distributed in North America by JVC Professional Video Products. To obtain service or for further information, please contact: SWIT Electronics America, Inc Address: 3350 Scott Blvd. 61-02, Santa Clara, CA 95054 Toll free: 1 866 986-SWIT (7948) •...