Related Manuals for ProHD DT-X93Hx2
Summary of Contents for ProHD DT-X93Hx2
- Page 1 Model: DT-X93Hx2 9”x2 FHD Rack Mount LCD Monitor User Manual Ver: A Please read this User Manual throughout before using.
-
Page 2: Preface
Preface 1. All internal technologies of this product are protected, including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. 2. All brands and trademarks are protected and other relative trademarks in this user manual are the property of their respective owners. -
Page 3: Maintenance
Maintenance Warning 1. In order to reduce the risk of fire and electrical shock, do not lay this product in rain or damp places. 2. Please keep away from the strong magnetic field; it may cause the noise of the video and audio signals. -
Page 4: Table Of Contents
Contents Preface .................................. 2 Maintenance ................................. 3 Contents ................................4 Installation Dimension ............................5 Operation Instructions ............................6 ·Front Panel ................................6 ·OSD ................................7 ·Back Panel ................................9 Sub-Menu ................................11 Specification ................................ 17 Trouble-shooting..............................18... -
Page 5: Installation Dimension
Installation Dimension The main body (in mm) -
Page 6: Operation Instructions
Operation Instructions ·Front Panel ⑴ Speaker: For SDI/HDMI embedded audio and analog audio monitoring. (Will not work if headphone socket is plugged in) ⑵ Button SOURCE: Press “SOURCE” to select SDI1, SDI2, HDMI, and CVBS signal input F1～F5: User definable function keys. Please see details in “4. Function key” under “Main Menu”. AUDIOBAR: Press “AUDIOBAR”... -
Page 7: Osd
·OSD ⑴ Timecode（SDI） Under SDI input, it can display Timecode. If no Timecode information is detected, it will be displayed as “TC: UNLOCKED”. User can set function keys F1～F5 or GPI pins as “Timecode” to turn on or off this function. ⑵... - Page 8 Introduction of audio and video functions 2-ch embedded audio meters Under SDI and HDMI input, it displays 2 channels embedded audio meters, and under analog input, the monitor displays 2 channels analog audio meters. The audio meter is green, and will turn yellow when audio exceeds -20dB, and turn red when audio exceeds -9dB.
-
Page 9: Back Panel
·Back Panel ⑴ GPI: TSL UMD&GPI control socket ⑵ SDI-LOOP1: SDI loop through output from SDI-IN1 (BNC) ⑶ SDI-LOOP2: SDI loop through output from SDI-IN2 (BNC) ⑷ CVBS-OUT: CVBS through output from CVBS-IN (BNC) ⑸ HDMI Socket HDMI-IN: HDMI input (HDMI-A) HDMI-OUT: HDMI loop through output from HDMI-IN (HDMI-A) ⑹... - Page 10 Main Menu DT-X93Hx2 has OSD to adjust the parameters and settings, for example: Picture, color temp., function keys, etc. 1. Press “MENU/ENTER” button, the main menu will pop-up from the left top of the screen. The selected main menu highlights in yellow.
-
Page 11: Sub-Menu
Sub-Menu (the default values are marked with underline) 1. Exit & Status Displays the current status, the details are as down below: *1 Display the current video signal and format *2 Display the current function keys setup 2. Picture To adjust picture parameters 3. - Page 12 4. Function key To define the F1～F5 function keys. *1 Function keys F1-F5 can be set as the down below functions: Timecode, Zebra, Audio Bar, False Color, AFD, H/V Delay, R/G/B/Mono, Marker, Color Bar, UMD, Audio Alarm, Focus Assist, Aspect Ratio, Scan Mode, Zoom Mode, Mute, Freeze Frame, Flip, CVBS, HDMI , SDI1, SDI2 ,Color Temp.
- Page 13 6. UMD Support “TSL UMD Protocol-V4.0” provided by Television System LTD Source ID Setup: Select “Source ID”, revolve “MENU/ENTER” to select the letters and press “MENU/ENTER" to input. Max 8 letters are supported. Select “Exit” to quit and save settings, the source ID will be displayed on top or bottom of the screen.
- Page 14 7. Marker *1 When “Fit Marker” is “Off”, the size of safety area is benchmarked against the actual display screen, accounting for 80% ~ 95% of actual display screen. When “Fit Marker” is “On”, the size of safety area is benchmarked against the area inside the scales marker, accounting for 80% ~ 95% of the area inside the scales marker.
- Page 15 SDI2 has no recognized signal, and CVBS has recognized signal, then the input signal will be CVBS. When set to “No”, update model will not be supported. *2 Logo When powered on, the screen will display ProHD logo.
- Page 16 *3、*4 Update Driver/ Kernel Download latest firmware files in USB disk - root directory. Switch on the monitor, and insert USB disk into the USB socket on rear panel. Enter Menu – System – Update Driver, select YES and the monitor will upgrade automatically, and will restart when upgrade finished.
-
Page 17: Specification
Specification LCD Performance 9 inches ×2 Size Display area 191.5×119.7 mm Resolution 1920×1200 Color 8 bit Aspect ratio 16:9 / 4:3 Brightness 450 cd/m Contrast 1000:1 Viewing Angle Horizontal: 170° Vertical: 170° Input/output – Each LCD BNC×2 2K/3G/HD/SD-SDI ×2 BNC×1 CVBS input HDMI×1 HDMI input... -
Page 18: Trouble-Shooting
Trouble-shooting Symptom Possible Causes Solution Please check if the power is connected, and then The power is not turned on press ”POWER” button to turn on the monitor Unstable power voltage Reconnect to power supply BNC or HDMI cable loose No display Check and correctly connect the contact or not correctly... - Page 19 This model is manufactured, warranted and supported by SWIT Electronics Co., Ltd. / SWIT Electronics USA, LLC, and distributed in North America by JVCKENWOOD USA Corporation To obtain service or for further information, please contact: SWIT Electronics USA, LLC. Address: 3350 Scott Blvd. 61-02, Santa Clara, CA 95054 Toll free: 1 866 986-SWIT (7948) •...