Related Manuals for ProHD DT-X73F
Summary of Contents for ProHD DT-X73F
-
Page 1: User Manual
Model: DT-X73F 7” Full HD Camera-top LCD Monitor User Manual Ver: A Please read this User Manual throughout before using. -
Page 2: Preface
Preface 1. All internal technologies of this product are protected, including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. 2. All brands and trademarks are protected and other relative trademarks in this user manual are the property of their respective owners. -
Page 3: Maintenance
Maintenance Warning 1. In order to reduce the risk of fire and electrical shock, do not lay this product in rain or damp places. 2. Please keep away from the strong magnetic field; it may cause the noise of the video and audio signals. -
Page 4: Table Of Contents
Contents Preface .................................. 2 Maintenance ................................. 3 Contents ................................4 Packing list ................................4 Operation Instructions ............................6 ·OSD ................................7 Main menu................................9 Sub-Menu ................................10 Specification ................................ 16 Trouble-shooting..............................17 Packing list Basic package includes: 1x Foldable sun hood 1x SSL-JVC battery plate (Pre-installed) 1x D-tap to 4-pin XLR DC cable 1x Cold shoe &... - Page 5 Dimension The main body (mm) Sun hood installation ⑴ Take out the sun hood from the flannel bag, see pic1; ⑵ Push out the sun hood as pic2, unfold as pic3; ⑶ Fold the two bottom parts inward as pic3, with the internal magnets attached and fixed as pic4; ⑷...
-
Page 6: Operation Instructions
Operation Instructions ⑴ SOURCE: Input signal source selection F1 – F4: User definable function keys User can set F1, F2, F3, F4 keys to corresponding function for quick operation. For details please refer to “Sub Menu - 4.Function key”. When user press and hold the function keys for more than 3 seconds, it will pop-up a definable function list menu, user can rotate and press to select functions. -
Page 7: Osd
·OSD ⑴ Timecode (SDI) Under SDI input, it can display Timecode. If no Timecode information is detected, it will be displayed as “TC: UNLOCKED”. User can set function keys F1 - F4 as “Timecode” to turn on or off this function ⑵... -
Page 8: Audio Alarm
Introduction of audio and video functions 16-ch embedded audio meters The monitor can display max 16 channels audio meters for SDI embedded audio, max 8 channels meters for HDMI embedded audio, and 2 channels meters for analog audio. The audio meter is green, and will turn yellow when audio exceeds -20dB, and turn red when audio exceeds -9dB. -
Page 9: Main Menu
Main menu DT-X73F has OSD to adjust the parameters and settings, for example: Picture, color temp., function keys, etc. 1. Press “MENU” button, the main menu will pop-up from the left top of the screen. The selected main menu highlights in yellow. -
Page 10: Sub-Menu
Sub-Menu (the default values are marked with underline) 1. Exit & Status Displays the current status, the details are as down below: *1 Display the current video signal and format *2 Display the current function keys setup 2. Picture To adjust picture parameters Color Temp To select different color temperature or setup user-defined color parameters * Only “Color Temp”... -
Page 11: Function Key
4. Function key To define the F1 – F4 function keys *1 Function keys F1 – F4 can be set as the down below functions: Audio Bar, Histogram, False Color, AFD, H/V Delay, R/G/B/Mono, Marker, Color Bar, UMD, Audio Alarm, Max backlight, Focus Assist, Aspect Ratio, Scan Mode, Zoom Mode, Mute, Freeze Frame, Flip Mode, Waveform, Color Temp, Timecode, Zebra, Vector. - Page 12 6. UMD ⑴ Select “Source ID” ⑵ The underline flashes as a reminder on the bottom of the first letter. Revolve "MENU" to select the letters; the letter will follow the sequence of the down below if clockwise revolved: ⑶ Press “MENU” to save the current settings letter and then start to set the next letter. ⑷...
- Page 13 8. Audio *1 When “Bar Frame” is set to “Off”, only the audio meter will be displayed. When “Bar Frame” is set to “On”, frame and real-time audio value will be displayed. *2 Select Channel Under HDMI signal, channel1-2 can be selected. Under SDI signal, channel 1-2, 1-8 and 1-16 can be selected.
- Page 14 9. Vector 10. Waveform *1: Only the “WFM Single Line” is set to “ON”, the “WFM Line Count” can be adjusted. “WFM Single Line” is to display the selected line waveform of “WFM Line Count” WFM Single Line: Off WFM Single Line: On 11.
- Page 15 When set to “Yes”, after turn on the monitor, the signal will be inspected and follow the sequence of “SDI1→SDI2→HDMI→CVBS→SDI1” *2 Logo: Refer to the startup displayed ProHD logo. *3 *4 Update Driver/ Kernel Download latest firmware files in USB disk - root directory.
-
Page 16: Specification
Specification LCD Performance Size 7 inch Display area 151.2×94.5 mm Resolution 1920×1200 Color 8 bit Aspect ratio 16:9∕4:3 Brightness 400 cd/m Contrast 1000:1 Viewing angle Horizontal∕Vertical: 160°∕160° Input∕Output HDMI×1 HDMI input BNC×2 2K/3G/HD/SD-SDI input Input BNC×1 CVBS input 3.5mm×1 Analog audio input USB×1 For firmware upgarde 2K/3G/HD/SD-SDI loop through output... -
Page 17: Trouble-Shooting
Trouble-shooting symptom Possible causes Solution Please check if the power is connected, and then The power is not turned on press ”POWER” button to turn on the monitor Unstable power voltage Reconnect to power supply BNC or HDMI cable loose No display Check and correctly connect the contact or not correctly... - Page 18 This model is manufactured by SWIT Electronics Co., Ltd. and distributed, warranted and supported in Europe by JVCKENWOOD Deutschland GmbH To obtain service or for further information, please contact: JVCKENWOOD Deutschland GmbH · Konrad-Adenauer-Allee 1-11 · 61118 Bad Vilbel Telefon: +49 (0) 6101 / 4988 - 0 · Telefax: +49 (0) 6101 / 4988 - 50 www.jvcpro.eu...