Related Manuals for ProHD DT-X93H
Summary of Contents for ProHD DT-X93H
-
Page 1: User Manual
Model: DT-X93H 9” Full HD Broadcast LCD Monitor User Manual Ver: A Please read this User Manual throughout before using. -
Page 2: Preface
Preface 1. All internal technologies of this product are protected, including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. 2. All brands and trademarks are protected and other relative trademarks in this user manual are the property of their respective owners. -
Page 3: Maintenance
Maintenance Warning 1. In order to reduce the risk of fire and electrical shock, do not lay this product in rain or damp places. 2. Please keep away from the strong magnetic field; it may cause the noise of the video and audio signals. -
Page 4: Table Of Contents
6. Power adaptor Introduction DT-X93H adopts IPS LCD panel, with resolution 1920×1200 and wide viewing angle H170°∕V170°. It supports 2 x 2K/3G/HD/SD-SDI (Level A/B), 1 x HDMI, 1 x CVBS and 1 x analog audio input; and 2 x 2K/3G/HD/SD-SDI, 1 x HDMI, 1 x CVBS and 1 x analog audio loop through output. -
Page 5: Installation Dimension
Installation Dimension The main body (in mm) -
Page 6: Operation Instructions
Operation Instructions ·Front Panel ⑴ Speaker: For SDI/HDMI embedded audio and analog audio monitoring. (Will not work if earphone is plugged in) ⑵ Button SOURCE: Press “SOURCE” to select SDI1, SDI2, HDMI, and CVBS signal input F1～F5: User definable function keys. Please see details in “4. Function key” under “Main Menu”. AUDIOBAR: Press “AUDIOBAR”... -
Page 7: Osd
·OSD ⑴ Timecode（SDI） Under SDI input, it can display Timecode. If no Timecode information is detected, it will be displayed as “TC: UNLOCKED”. User can set function keys F1～F5 or GPI pins as “Timecode” to turn on or off this function. ⑵... -
Page 8: Audio Alarm
Introduction of audio and video functions 2-ch embedded audio meters Under SDI and HDMI input, it displays 2 channels embedded audio meters, and under analog input, the monitor displays 2 channels analog audio meters. The audio meter is green, and will turn yellow when audio exceeds -20dB, and turn red when audio exceeds -9dB. -
Page 9: Back Panel
·Back Panel ⑴ TALLY Light: Red, Green and Yellow 3-color TALLY indicator. ⑵ DC IN: Connect with 4-pin XLR DC power adapter, support 6.5V-24V voltage input (Pin 1: Negative, Pin 4: Positive) ⑶ Battery mount connector The monitor has Gold mount plate pre-installed, and supplied an SSL-JVC50 battery plate in package for exchange. -
Page 10: Main Menu
Main Menu DT-X93H has OSD to adjust the parameters and settings, for example: Picture, color temp., function keys, etc. 1. Press “MENU/ENTER” button, the main menu will popup from the left top of the screen. The selected main menu highlights in yellow. -
Page 11: Sub Menu
Sub-Menu (the default values are marked with underline) 1. Exit & Status Displays the current status, the details are as down below: *1 Display the current video signal and format *2 Display the current function keys setup 2. Picture To adjust picture parameters 3. -
Page 12: Function Key
4. Function key To define the F1～F5 function keys. *1 Function keys F1-F5 can be set as the down below functions: Timecode, Zebra, Audio Bar, False Color, AFD, H/V Delay, R/G/B/Mono, Marker, Color Bar, UMD, Audio Alarm, Focus Assist, Aspect Ratio, Scan Mode, Zoom Mode, Mute, Freeze Frame, Flip, CVBS, HDMI , SDI1, SDI2 ,Color Temp. - Page 13 6. UMD Support “TSL UMD Protocol-V4.0” provided by Television System LTD Source ID Setup: Select “Source ID”, revolve “MENU/ENTER” to select the letters and press “MENU/ENTER" to input. Max 8 letters are supported. Select “Exit” to quit and save settings, the source ID will be displayed on top or bottom of the screen.
- Page 14 8. Audio *1 When “Bar Frame” is set to “Off”, only the audio meter will be displayed. When “Bar Frame” is set to “On”, frame and real-time audio value will be displayed. *2 When “Audio Alarm” is set to “On”, if no embedded audio is detected, the audio bar will display “UNLOCKED”.
- Page 15 CVBS. When set to “No”, update model will not be supported. *2 Logo When powered on, the screen will display ProHD logo. *3、*4 Update Driver/ Kernel Download latest firmware files in USB disk - root directory.
- Page 16 13. OSD 14. Key Inhibit If the “Key Inhibit” is “On”, there is no response when all the buttons expert ” MENU/ENTER” are pressed, the sreen will be displayed as ” Key Inhibit”.
-
Page 17: Specification
Specification LCD Performance 9 inches Size Display area 191.5×119.7 mm Resolution 1920×RGB×1200 Color 8 bit Aspect ratio 16:9 / 4:3 Brightness 450 cd/m Contrast 1000:1 Viewing Angle Horizontal: 170° Vertical: 170° Input/output BNC×2 2K/3G/HD/SD-SDI ×2 BNC×1 CVBS input HDMI×1 HDMI input Input GPI×1 UMD, GPI control input... -
Page 18: Trouble-Shooting
Trouble-shooting Symptom Possible Causes Solution Please check if the power is The power is not turned on connected, and then press ”POWER” button to turn on the monitor Unstable power voltage Reconnect to power supply No display BNC or HDMI cable loose contact or Check and correctly connect the BNC not correctly connected or HDMI cable... - Page 19 This model is manufactured, warranted and supported by SWIT Electronics Co., Ltd. / SWIT Electronics USA, LLC, and distributed in North America by JVCKENWOOD USA Corporation.. To obtain service or for further information, please contact: SWIT Electronics USA, LLC. Address: 3350 Scott Blvd. 61-02, Santa Clara, CA 95054 Toll free: 1 866 986-SWIT (7948) •...