Table of Contents
Advertisement
2.2
Figure 3 Enplas OTB-292(961RS)-0.8-019S-00 Socket with Mounted Device
R20UT4084ED0130 Rev. 1.3
2020-05-12
Mounting of the device
The Y-RH850-E2X-292PIN-PB-T1-V1 PiggyBack board features a socket for
mounting of the device. All E2x in BGA-292 package do fit into the available
Enplas OTB-292(961RS)-0.8-019S-00 socket.
The device must be placed inside the socket IC1. To insert the device align the
device package #1pin with the #1pin of the socket. The #1pin of the socket is
marked with a circle near to the "IC1" label (see also red arrow in Figure 1). The
#1pin of the device is marked by a white triangle on the package (see white circle
in Figure 3).
CAUTION: Please be careful with the placement to not damage the device.
5
Advertisement
Table of Contents
