Renesas RH850/E2 Series User Manual page 17

R20UT4084ED0130 Rev. 1.3
2020-05-12

#x-#y: Connect the pins #x and #y for the standard configuration.
Possible to configure depending on the use case and on the allowed
specification of the used device.
A small circle near the jumper on the board and a rectangular representation of
the pin in the overview picture in sec. 2.1 identifies the #1 pin of the jumper.
Figure 5 Identifying the Pin #1 f a Jumper
In this example (JP30), the pin #1 is on the right side. The red arrow highlights
the marking circle.
17