AXIOMTEK GOT715S-RA-M User Manual

Railway 15" xga tft lcd

Advertisement

Quick Links

GOT715S-RA-M
Railway 15" XGA TFT LCD
PANEL PC
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GOT715S-RA-M and is the answer not in the manual?

Questions and answers

Summary of Contents for AXIOMTEK GOT715S-RA-M

  • Page 1 GOT715S-RA-M Railway 15” XGA TFT LCD PANEL PC User’s Manual...
  • Page 2: Disclaimers

    Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Axiomtek Co., Ltd.
  • Page 3: Safety Precautions

    ◼ When handling boards and components, wear a wrist-grounding strap, available from most electronic component stores. Trademarks Acknowledgments Axiomtek is a trademark of Axiomtek Co., Ltd. ® Windows is a trademark of Microsoft Corporation. IBM, PC/AT, PS/2, VGA are trademarks of International Business Machines Corporation.
  • Page 4: Table Of Contents

    Table of Contents Disclaimers ..................... ii Safety Precautions ..................iii Section 1 Introduction ..........1 General Description ................1 Specifications ..................2 Dimensions and Outlines ..............4 I/O Outlets .................... 5 Packing List ..................6 Section 2 Hardware and Installation ...... 7 Open back cover .................
  • Page 5 Chipset Menu ..................30 Security Menu ..................33 Boot Menu ..................34 Exit Menu ................... 35...
  • Page 6 This page is intentionally left blank.
  • Page 7: Introduction

    ⚫ General Description GOT715S-RA-M is utilized to keep the train driver informed about the status of the train’s status. Its design allows it to be deployed in environment with an extended temperature (-25°C~70°C) and it also complies with the EMC, shock and vibration test requirements of European standard EN 50155 for railway applications.
  • Page 8: Specifications

    GOT715S-RA-M User’s Manual Specifications Main CPU Board ⚫ ® Intel Atom E3845 1.91GHz processor onboard ◼ ⚫ System Memory DDR3L 4 GB onboard ◼ ⚫ BIOS America Megatrends Inc BIOS ◼ I/O System Standard I/O ⚫ 2 x RS-232/422/485 with isolated 1.5KV (M12, A-coded) ◼...
  • Page 9 GOT715S-RA-M User’s Manual System Specification ⚫ 15” XGA (1024 X 768) LCD ⚫ 5-wire resistive Touch ⚫ IP65 aluminum front bezel ⚫ Net Weight ◼ 4.03 Kg ⚫ Dimension (Main Body Size) ◼ 400(W)*300(H)*61.5(D) ⚫ Operation Temperature ◼ -25℃ to 70℃...
  • Page 10: Dimensions And Outlines

    GOT715S-RA-M User’s Manual Dimensions and Outlines The following diagrams show the dimensions and outlines of GOT715S-RA-M. Introduction...
  • Page 11: I/O Outlets

    GOT715S-RA-M User’s Manual I/O Outlets Please refer to the following illustration for I/O locations of the GOT715S-RA-M. Function DC for power input with isolated 1.5KV CAN Bus with isolated 1.5KV Audio (Line out, Line in, speaker out) DIO (6 input/2 output with isolated 1.5KV) USB 2.0 x 2(M12, A-coded)
  • Page 12: Packing List

    When you receive the GOT715S-RA-M, the bundled package should contain the following items: GOT715S-RA-M unit x 1 ⚫ Phoenix Connector x 1 ⚫ Screw M2*3L x 2 ⚫ If you cannot find the package or any items are missing, please contact Axiomtek distributors immediately. Introduction...
  • Page 13: Hardware And Installation

    GOT715S-RA-M User’s Manual Section 2 Hardware and Installation The GOT715S-RA-M provides rich I/O ports and flexible expansions for you to meet different demand. The chapter will show you how to install the hardware. It includes: Open back cover ⚫ Serial Ports ⚫...
  • Page 14: Open

    GOT715S-RA-M User’s Manual Open back cover This section shows users how to open back cover. Please follow the steps below. Step 1 Unscrew 14 screws on the back cover. Please refer the photo below. Serial Ports Interface This system supports RS-232/422/485 isolated 1.5KV on COM1~COM2 ports. The pin assignments are listed in table below.
  • Page 15: Usb Ports

    USB_DP2_C Ethernet The GOT715S-RA-M is equipped with two high performance plug and play Ethernet interfaces with X-coded which are fully compliant with the IEEE 802.3 standard. Connection can be established by plugging one end of the Ethernet cable into this RJ-45 connector and the other end to a 1000/100/10-Base-T hub with isolated 1.5KV.
  • Page 16: Dio

    GOT715S-RA-M User’s Manual 2.5.1 Digital I/O Specification This system supports one DIO (6 input and 2 output) with isolated 1.5KV. The pin assignments are listed in table below. Digital Input: Input channels: 6, sink/source type Input voltage: 0 to 30VDC at 25Hz...
  • Page 17: Digital I/O Software Programming

    GOT715S-RA-M User’s Manual 2.5.2 Digital I/O Software Programming ⚫ I2C to GPIO PCA9554PW GPIO Group0[5:0] is Input, Group0[7:6] is Output. ⚫ I2C address: 0b0100100x. ⚫ Registers: Register 0: Input Group0 register. Register 2: Output Group0 register. Hardware and Installation...
  • Page 18: Digital Input Wiring

    GOT715S-RA-M User’s Manual 2.5.3 Digital Input Wiring DRY contact Logic level 0: close to ground Logic level 1: open WET contact Logic level 1: +/-3VDC max. Logic level 0: +/- 10VDC min. to +/-30VDC max Hardware and Installation...
  • Page 19: Digital Output Wiring

    GOT715S-RA-M User’s Manual 2.5.4 Digital Output Wiring Audio This system supports one Audio (Line out, Line in, speaker out) with isolated 1.5KV. The pin assignments are listed in table below. Definition SPEK_OUTA+ SPEK_OUTA- AUDIO_GND AUDIO_OUT_L AUDIO_OUT_R FRONT-JD AUDIO_GND AUDIO_LIN_IN_L AUDIO_LIN_IN_R...
  • Page 20: Canbus Connector

    GOT715S-RA-M User’s Manual CANBUS connector This system supports one CAN Bus with isolated 1.5KV. The pin assignments are listed in table below. Definition CAN_LO ISO3_GND ISO3_GND CAN_HO DC Power connector The system supports one DC for power input with isolated 1.5KV. The pin assignments are listed in table below.
  • Page 21: Mini Card Installation

    Mini card Installation 2.9.1 Wireless LAN Card Installation The GOT715S-RA-M provides two Mini card slots for user to install wireless LAN cards. You can choose either slot 1 or slot 2 to install the wireless LAN card and refer to the following.
  • Page 22: Msata Card Installation

    GOT715S-RA-M User’s Manual 2.9.2 mSATA Card Installation The GOT715S-RA-M provides one Mini card slot for user to install mSATA. Please choose the slot 2 for the mSATA card and refer to the following instructions and illustration: Step 1 Open the back cover and find out the mini-card slot on main board.
  • Page 23: Led Indicators

    GOT715S-RA-M User’s Manual 2.10 LED indicators LED lights make sure that whether the MCU is working properly and facilitating to debug in the phase of research and development. It is not necessarily the actual system mounting LED lights. The following table summarizes the buzzer and LED indication of the device 2.11...
  • Page 24 GOT715S-RA-M User’s Manual This page is intentionally left blank. Hardware and Installation...
  • Page 25: Ami Bios Setup Utility

    GOT715S-RA-M User’s Manual Section 3 AMI BIOS Setup Utility The AMI UEFI BIOS provides users with a built-in setup program to modify basic system configuration. All configured parameters are stored in a flash chip to save the setup information whenever the power is turned off. This chapter provides users with detailed description about how to set up basic system configuration through the AMI BIOS setup utility.
  • Page 26: Menu Bar

    GOT715S-RA-M User’s Manual Menu Bar The top of the screen has a menu bar with the following selections: Menu Bar Description Main To set up the system time/date information. Advanced To set up the advanced BIOS features. H/W Monitor To display current hardware status.
  • Page 27: Main Menu

    GOT715S-RA-M User’s Manual Main Menu When you first enter the setup utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. System Time/Date can be set up as described below.
  • Page 28: Advanced Menu

    GOT715S-RA-M User’s Manual Advanced Menu The Advanced menu also allows users to set configuration of the CPU and other system devices. You can select any of the items in the left side menu to go to the sub menus: NCT6106D Super IO Configuration ◼...
  • Page 29 GOT715S-RA-M User’s Manual ⚫ NCT6106D Super IO Configuration Use this screen to select options for the Super IO Configuration, and change the value of the selected option AMI BIOS Setup Utility...
  • Page 30 GOT715S-RA-M User’s Manual Serial Port 1-2 configuration 1. Serial port: This option used to enable or disable the serial port. 2. Device Setting: This item specifies the base I/O port address and Interrupt Request address of serial port. The port 1 Optimal setting is 3F8/IRQ4.
  • Page 31 GOT715S-RA-M User’s Manual ⚫ NCT6106D H/W Monitor This screen shows the Hardware Health Configuration. AMI BIOS Setup Utility...
  • Page 32 GOT715S-RA-M User’s Manual ⚫ CPU Configuration This screen shows the CPU Configuration and intel virtualization technology enable/disable selected AMI BIOS Setup Utility...
  • Page 33 GOT715S-RA-M User’s Manual ⚫ IDE Configuration You can use this screen to select options for the SATA Configuration and change the value of the selected option. ⚫ SATA Mode Use this item to choose the SATA operation mode. Here are the options for your selection, IDE Mode, AHCI Mode.
  • Page 34 GOT715S-RA-M User’s Manual ⚫ Miscellaneous Configuration Use this screen to select different OS, Windows8.X, Android, Windows7. AMI BIOS Setup Utility...
  • Page 35 GOT715S-RA-M User’s Manual ⚫ CSM Configuration Enable is Legacy mode, Disable is UEFI mode. ⚫ USB Configuration Display USB Device Configuration AMI BIOS Setup Utility...
  • Page 36: Chipset Menu

    GOT715S-RA-M User’s Manual Chipset Menu In this section, it will display the available devices on your system for you to configure the boot settings and the boot priority. ⚫ North Bridge This screen shows the North Bridge memory information. You can use this screen to select options for the LVDS Configuration.
  • Page 37 GOT715S-RA-M User’s Manual ⚫ South Bridge AMI BIOS Setup Utility...
  • Page 38 GOT715S-RA-M User’s Manual ⚫ USB Configuration Only support USB2.0(EHCI). AMI BIOS Setup Utility...
  • Page 39: Security Menu

    GOT715S-RA-M User’s Manual Security Menu In this section, you may set, change or clear the supervisor/user password for the system. AMI BIOS Setup Utility...
  • Page 40: Boot Menu

    GOT715S-RA-M User’s Manual Boot Menu The Boot menu allows users to change boot options of the system. You can select any of the items in the left frame of the screen to go to the sub menus: Setup Prompt Timeout...
  • Page 41: Exit Menu

    GOT715S-RA-M User’s Manual Exit Menu NOTE Before updating TXE Firmware, you need to load default and reboot. AMI BIOS Setup Utility...

Table of Contents