HIKVISION DS-K1T673 Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Touch terminals
  5. DS-K1T673
  6. User manual
HIKVISION DS-K1T673 Series User Manual

HIKVISION DS-K1T673 Series User Manual

Face recognition terminal
Hide thumbs Also See for DS-K1T673 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K1T673 Series Face Recognition Terminal
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-K1T673 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HIKVISION DS-K1T673 Series

Summary of Contents for HIKVISION DS-K1T673 Series

  • Page 1 DS-K1T673 Series Face Recognition Terminal User Manual...

  • Page 2: Regulatory Information

    DS-K1T673 Series Face Recognition Terminal User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 3 DS-K1T673 Series Face Recognition Terminal User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.

  • Page 4: Safety Instruction

    DS-K1T673 Series Face Recognition Terminal User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death.
  • Page 5 DS-K1T673 Series Face Recognition Terminal User Manual Cautions: Do not drop the device or subject it to physical shock, and do not expose it to high ● electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).

  • Page 6: Available Models

    DS-K1T673 Series Face Recognition Terminal User Manual Available Models Product Name Model Face Recognition Terminal DS-K1T673DX DS-K1T673DWX DS-K1T673TDX DS-K1T673TDWX DS-K1T673TDGX DS-K1T673TMW DS-K1T673TMG Use only power supplies listed in the user instructions: Model Manufacturer Standard C2000IC12.0-24P-DE MOSO Power Supply Technology Co., Ltd.

  • Page 7: Legal Information

    ● Products described in this Document, which may include licenses obtained from third parties. Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part ● of this Document may be excerpted, copied, translated, or modified in whole or in part by any means without written permission.

  • Page 8: Data Protection

    LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY ●...

  • Page 9: Symbol Conventions

    DS-K1T673 Series Face Recognition Terminal User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury.

  • Page 10: Table Of Contents

    DS-K1T673 Series Face Recognition Terminal User Manual Contents Chapter 1 Appearance ........................ 1 Chapter 2 Installation ......................... 3 2.1 Installation Environment ......................3 2.2 Flush Mounting with Gang Box ....................3 2.3 Surface Mounting ........................7 2.4 Mount With Bracket ......................11 2.4.1 Preparation before Mounting with Bracket ..............
  • Page 11 DS-K1T673 Series Face Recognition Terminal User Manual 6.5 Privacy Settings ........................38 6.6 Set Administrator ......................... 38 6.7 Authentication Page Instructions ..................39 Chapter 7 Basic Operation ......................41 7.1 Login ............................ 41 7.1.1 Login by Administrator ....................41 7.1.2 Login by Activation Password ..................44 7.1.3 Forgot Password ......................
  • Page 12 DS-K1T673 Series Face Recognition Terminal User Manual 7.3.12 Set Person Door Permission via Device ..............68 7.4 Data Management ....................... 70 7.4.1 Delete Data ......................... 70 7.4.2 Import Data ......................... 70 7.4.3 Export Data ......................... 71 7.5 Person Authentication ......................72 7.5.1 Authenticate via Single Credential ................
  • Page 13 DS-K1T673 Series Face Recognition Terminal User Manual 7.7.10 Face Duplicate Check via Device ................82 7.7.11 Set Palm Print ......................82 7.8 Access Control Settings ......................83 7.8.1 Set Terminal Authentication Mode via Device ............83 7.8.2 Set Reader Authentication Mode via Device .............. 84 7.8.3 Manually Trigger Face Authentication via PC Web .............
  • Page 14 DS-K1T673 Series Face Recognition Terminal User Manual 7.12.2 Call Center from Device .................... 98 7.12.3 Call Device from Client Software ................99 7.12.4 Call Room from Device ....................99 7.12.5 Call Mobile Client from Device ................100 Chapter 8 Operation via Web Browser ..................101 8.1 Login ..........................
  • Page 15 DS-K1T673 Series Face Recognition Terminal User Manual 8.8.7 Elevator Control via Web ..................127 8.8.8 Linkage Settings ......................128 8.8.9 Set Working Mode via PC Web ................. 129 8.8.10 Set Remote Verification ..................129 8.8.11 Privacy Settings ....................... 129 8.8.12 Call Settings ......................132 8.9 System Configuration ......................
  • Page 16 DS-K1T673 Series Face Recognition Terminal User Manual 8.11.1 Reboot ........................160 8.11.2 Upgrade ........................160 8.11.3 Restoration ......................161 8.11.4 Export Device Parameters via PC Web ..............161 8.11.5 Import Device Parameters via PC Web ..............162 8.11.6 Device Debugging ....................162 8.11.7 View Log via PC Web ....................

  • Page 17: Chapter 1 Appearance

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 1 Appearance Refer to the following contents for detailed information of the face recognition terminal: Figure 1-1 Face Recognition Terminal Figure 1-2 Fingerprint + Bluetooth + QR Code Module Figure 1-3 Wireless Module（ 433/868 Mhz）...
  • Page 18 DS-K1T673 Series Face Recognition Terminal User Manual Figure 1-4 Palm Print and Palm Vein Module Figure 1-5 Dual-frequency Card Module（13.56 Mhz and 125 Khz） Note The figures are for reference only. ● The device supports different modules, which can be accessed according to your actual needs.

  • Page 19: Chapter 2 Installation

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 2 Installation 2.1 Installation Environment Avoid backlight, direct sunlight, and indirect sunlight. ● For better recognition, there should be light source in or near the installation environment. ● If you have to install the device outdoors, you should install a protective shield (optional) for the ●...
  • Page 20 DS-K1T673 Series Face Recognition Terminal User Manual Figure 2-1 Install Gang Box 2. Secure the mounting plate on the gang box with 2 supplied screws (SC-K1A4X24_5).
  • Page 21 DS-K1T673 Series Face Recognition Terminal User Manual Figure 2-2 Install Mounting Plate 3. Route the cable through the cable hole, wire the cables and insert the cables in the gang box.
  • Page 22 DS-K1T673 Series Face Recognition Terminal User Manual Figure 2-3 Secure Device Note Apply Silicone sealant among the cable wiring area to keep the raindrop from entering. 4. Align the device with the mounting plate, and secure the device on the mounting plate with 1...

  • Page 23: Surface Mounting

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 2-4 Secure Device 5. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen. 2.3 Surface Mounting Steps Note The additional force shall be equal to three times the weight of the equipment. The equipment ad its associated mounting means shall remain secure during the installation.
  • Page 24 DS-K1T673 Series Face Recognition Terminal User Manual Figure 2-5 Mounting Template 2. Drill holes on the wall or other surface according to the Hole 1 on the mounting template. 3. Remove the cable hole on the mounting plate with tools.
  • Page 25 DS-K1T673 Series Face Recognition Terminal User Manual Figure 2-6 Install Mounting Plate 5. Route the cable through the cable hole of the mounting plate, and connect to corresponding peripherals cables. Note If the device is installed outdoor, you should apply silicone sealant to the wiring exit to avoid...
  • Page 26 DS-K1T673 Series Face Recognition Terminal User Manual Figure 2-7 Apply Silicone Sealant 6. Align the device with the mounting plate and hang the device on the mounting plate. Figure 2-8 Hang Device 7. Use 1 supplied screw (KM3×6) to secure the device and the mounting plate.

  • Page 27: Mount With Bracket

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 2-9 Secure Device 8. Optional: Connect the peripheral module according to your actual needs. 9. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen.
  • Page 28 DS-K1T673 Series Face Recognition Terminal User Manual Figure 2-10 Drill Holes on Turnstile 2. If the installation angle needs to be 180° perpendicular to the body of the turnstile, the following operations are required. 1) Take off the 3 screws shown in the following figure.

  • Page 29: Mount Bracket

    DS-K1T673 Series Face Recognition Terminal User Manual 2.4.2 Mount Bracket Steps 1. Pass the bracket bottom through the turnstile, and fix it into the turnstile with self-contained nut. Adjust the bracket to the suitable angle, and fix the nut tightly by the wrench.
  • Page 30 DS-K1T673 Series Face Recognition Terminal User Manual Figure 2-14 Fix Mounting Plate 3. Pass face recognition terminal cables through the cable hole, and insert them into the inner turnstile. Fix the face recognition terminal into the mounting plate with KM3×6-H2-SUS screws.
  • Page 31 DS-K1T673 Series Face Recognition Terminal User Manual Figure 2-15 Fix Face Recognition Terminal 4. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen.

  • Page 32: Chapter 3 Wiring

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 3 Wiring The device supports connecting to the RS-485 terminal, the door lock, the exit button, the alarm output/input devices, the Wiegand card reader, the access controller, and the power supply. You can wire the peripherals according to the descriptions below.
  • Page 33 DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-1 Terminal Diagram The descriptions of the terminals are as follows:...

  • Page 34: Wire Normal Device

    DS-K1T673 Series Face Recognition Terminal User Manual Table 3-1 Terminal Descriptions Group Function Color Name Description Group A Power Input +12 V 12 VDC Power Supply Black Ground Group B Alarm Input Yellow/Blue Alarm Input 1 Black Ground Yellow/Orange IN2...

  • Page 35: Wire Secure Door Control Unit

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-2 Device Wiring Note You should set the face recognition terminal's Wiegand direction as Input to connect to a ● Wiegand card reader. If connects to an access controller, you should set the Wiegand direction as Output to transmit authentication information to the access controller.

  • Page 36: Wire Fire Module

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-3 Secure Door Control Unit Wiring Note The secure door control unit should connect to an external power supply separately. The suggested external power supply is 12V, 0.5A. 3.4 Wire Fire Module 3.4.1 Wiring Diagram of Door Open When Powering Off...
  • Page 37 DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-4 Wire Device Figure 3-5 Wire Secure Door Control Unit Type 2 Note The fire system (NO and COM, normally open when powering off) is connected with the lock and the power supply in series. When an fire alarm is triggered, the door remains open. In normal...

  • Page 38: Wiring Diagram Of Door Locked When Powering Off

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-6 Wiring Device Figure 3-7 Wiring Secure Door Control Unit 3.4.2 Wiring Diagram of Door Locked When Powering Off Lock Type: Cathode Lock, Electric Lock, and Electric Bolt (NC) Security Type: Door Locked When Powering Off...
  • Page 39 DS-K1T673 Series Face Recognition Terminal User Manual Scenario: Installed in Entrance/Exit with Fire Linkage Note The Uninterpretable Power Supply (UPS) is required. ● The fire system (NC and COM, normally closed when powering off) is connected with the lock ●...
  • Page 40 DS-K1T673 Series Face Recognition Terminal User Manual Figure 3-9 Wiring Diagram...

  • Page 41: Chapter 4 Palm Print And Palm Vein Indicator Description

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 4 Palm Print and Palm Vein Indicator Description Indicator Description Solid Red The device is offline. Fast-​ fl ashing Red The palms are too close. Slow-​ fl ashing Red Authenticating failed. The green light is on for 3 s...

  • Page 42: Chapter 5 Activation

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 5 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported.
  • Page 43 DS-K1T673 Series Face Recognition Terminal User Manual Figure 5-1 Activation Page Caution The password strength of the device can be automatically checked. We highly recommend you ● change the password of your own choosing (using a minimum of 8 characters, including at least...

  • Page 44: Activate Via Web Browser

    ● insensitive), 4 or more continuously increasing or decreasing digits, or 4 or more consecutively repeated characters. Password cannot contain words such as hik, hkws, and hikvision (case insensitive). ● 5.2 Activate via Web Browser You can activate the device via the web browser.

  • Page 45: Activate Via Sadp

    Get the SADP software from the supplied disk or the official website http:// ● www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet.

  • Page 46: Activate Device Via Ivms-4200 Client Software

    DS-K1T673 Series Face Recognition Terminal User Manual Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP.
  • Page 47 DS-K1T673 Series Face Recognition Terminal User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 48: Chapter 6 Quick Operation

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 6 Quick Operation 6.1 Select Language You can select a language for the device system. After the device activation, you can select a language for the device system.
  • Page 49 DS-K1T673 Series Face Recognition Terminal User Manual Figure 6-1 Select System Language By default, the system language is English. Note After you change the system language, the device will reboot automatically.

  • Page 50: Set Password Change Type

    DS-K1T673 Series Face Recognition Terminal User Manual 6.2 Set Password Change Type You can set the password change type as reserved email address or security questions. Once you forgot the device password, you can change the password via the selected change type.
  • Page 51 DS-K1T673 Series Face Recognition Terminal User Manual Figure 6-2 Select Network Note Disconnect the wired network before connecting a Wi-Fi. 2. Tap Next. Wired Network Note Make sure the device has connected to a network.

  • Page 52: Access To Platform

    DS-K1T673 Series Face Recognition Terminal User Manual If enable DHCP, the system will assign the IP address and other parameters automatically. If disable DHCP, you should set the IP address, the subnet mask, and the gateway. Wi-Fi Select a Wi-Fi and enter the Wi-Fi's password to get connected.
  • Page 53 DS-K1T673 Series Face Recognition Terminal User Manual Figure 6-3 Access to Hik-Connect 2. Tap Next. 3. Optional: Tap Skip to skip the step. 4. Optional: Tap Previous to go to the previous page.

  • Page 54: Privacy Settings

    DS-K1T673 Series Face Recognition Terminal User Manual Note If you tap Previous to return to the Wi-Fi configuration page, you need to tap the connected Wi- Fi or connect another Wi-Fi to enter the platform page again. 6.5 Privacy Settings After activation, selecting application mode, and selecting network, you should set the privacy parameters, including the picture uploading and storage.

  • Page 55: Authentication

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 6-4 Add Administrator Page 3. Select a credential to add. Note Up to one credential should be added. : Face forward at the camera. Make sure the face is in the face recognition area. Click capture and click to confirm.
  • Page 56 DS-K1T673 Series Face Recognition Terminal User Manual Status Bar Instructions Device is armed/not armed. The device' Wi-Fi is enabled and signal is strong/Wi-Fi is enabled but not connected/Wi-Fi's IP address is conflict. The device wired network is connected/not connected/connecting failed.

  • Page 57: Chapter 7 Basic Operation

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 7 Basic Operation 7.1 Login Login the device to set the device basic parameters. 7.1.1 Login by Administrator If you have added an administrator for the device, only the administrator can login the device for device operation.
  • Page 58 DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-1 Admin Login 2. Authenticate the administrator's face, fingerprint, or card to enter the home page.
  • Page 59 DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-2 Home Page Note The device will be locked for 30 minutes after 5 failed fingerprint or card attempts. 3. Optional: Tap and you can enter the device activation password for login.

  • Page 60: Login By Activation Password

    DS-K1T673 Series Face Recognition Terminal User Manual 7.1.2 Login by Activation Password You should login the system before other device operations. If you do not configure an administrator, you should follow the instructions below to login. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture to enter password entering page.

  • Page 61: Forgot Password

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-3 Home Page 7.1.3 Forgot Password If you forget the password during authentication, you can change the password.

  • Page 62: Change Device Password

    DS-K1T673 Series Face Recognition Terminal User Manual Steps 1. Hold the initial page for 3 s and slide to the left/right by following the gesture and log in the page. 2. Optional: If you have set an administrator, tap in the pop-up admin authentication page.

  • Page 63: Communication Settings

    DS-K1T673 Series Face Recognition Terminal User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.
  • Page 64 DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-4 Wired Network Settings 3. Set IPv4/IPv6 IP Address, Subnet Mask, and Gateway. - Enable DHCP, and the system will assign IP address, subnet mask, and gateway automatically. - Disable DHCP, and you should set the IP address, subnet mask, and gateway manually.

  • Page 65: Set Wi-Fi Parameters

    DS-K1T673 Series Face Recognition Terminal User Manual Note The device's IP address and the computer IP address should be in the same IP segment. 4. Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and the alternate DNS server.
  • Page 66 DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-5 Wi-Fi Settings 3. Enable the Wi-Fi function. 4. Configure the Wi-Fi parameters. - Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK. - If the target Wi-Fi is not in the list,tap Add Wi-Fi. Enter the Wi-Fi's name and password. And...

  • Page 67: Set Rs-485 Parameters

    DS-K1T673 Series Face Recognition Terminal User Manual Note Only digits, letters, and special characters are allowed in the password. 5. Set the Wi-Fi's parameters. - By default, DHCP is enable. The system will allocate the IP address, the subnet mask, and the gateway automatically.

  • Page 68: Set Wiegand Parameters

    DS-K1T673 Series Face Recognition Terminal User Manual 7.2.4 Set Wiegand Parameters You can set the Wiegand transmission direction. Steps 1. Tap System → Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap Wiegand to enter the Wiegand tab.
  • Page 69 DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-7 ISUP Settings 2. Enable the ISUP function and set the ISUP server parameters. ISUP Version Set the ISUP version according to your actual needs. Central Group Enable central group and the data will be uploaded to the center group.

  • Page 70: Platform Access

    DS-K1T673 Series Face Recognition Terminal User Manual IP Address Set the ISUP server's IP address. Port No. Set the ISUP server's port No. Note Port No. Range: 0 to 65535. Device ID Set device serial no. Password If you choose V5.0, you should create an account and ISUP key. If you choose other version, you should create an ISUP account only.

  • Page 71: Add Administrator

    DS-K1T673 Series Face Recognition Terminal User Manual 7.3.1 Add Administrator The administrator can log in the device backend and configure the device parameters. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and enter the device backend.

  • Page 72: Import And Export Face And Person Data In Batch Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual 3. Edit the employee ID. Note The employee ID should be less than 32 characters. And it can be a combination of lower ● letters, upper letters, and numbers. The employee ID should not be duplicated.
  • Page 73 DS-K1T673 Series Face Recognition Terminal User Manual Note The supported USB flash drive format is FAT32 or exFAT. ○ The system supports the USB flash drive with the storage of 1 G to 256 G. Make sure the free ○...

  • Page 74: Add Face Picture

    DS-K1T673 Series Face Recognition Terminal User Manual 2. Tap Export Data in the Data Management page. 3. Select Person Data or Face Data. 4. Optional: Create a password for exporting. When you import those data to another device, you should enter the password.
  • Page 75 DS-K1T673 Series Face Recognition Terminal User Manual 2. Tap Person → + to enter the Add Person page. 3. Edit the employee ID. Note The employee ID should be less than 32 characters. And it can be a combination of lower ●...
  • Page 76 DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-9 Add Face Picture 6. Look at the camera. Note Make sure your face picture is in the face picture outline when adding the face picture. ● Make sure the captured face picture is in good quality and is accurate.

  • Page 77: Add Card

    DS-K1T673 Series Face Recognition Terminal User Manual 7. Tap Save to save the face picture. 8. Optional: Tap Try Again and adjust your face position to add the face picture again. 9. Set the person type. Basic Person The person is the normal person. The person can only authenticate or take attendance on the initial page.

  • Page 78: Add Fingerprint

    DS-K1T673 Series Face Recognition Terminal User Manual 7. Configure the card No. - Enter the card No. manually. - Present the card over the card presenting area to get the card No. Note The card No. cannot be empty. ●...

  • Page 79: View Pin Code

    DS-K1T673 Series Face Recognition Terminal User Manual For details about the instructions of scanning fingerprints, see Tips for Scanning Fingerprint . 7. Tap to save the settings. 7.3.6 View PIN code Add a PIN code for the person and the person can authenticate via the PIN code.

  • Page 80: Add Palm Print And Palm Vein

    DS-K1T673 Series Face Recognition Terminal User Manual Note The employee ID should be less than 32 characters. And it can be a combination of lower ● letters, upper letters, and numbers. The employee ID should not start with 0 and should not be duplicated.

  • Page 81: Set Person Type Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the ● person name. The suggested person name should be within 32 characters. ● 5. Tap Palm Print, and tap + to enter the adding page.
  • Page 82 DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-10 Add Person 2. Tap Employee ID and you can edit the Employee ID. Note The employee ID cannot be more than 32 characters. It can be a combination of upper case letters, lower case letters, and digits.

  • Page 83: Set Authentication Mode

    DS-K1T673 Series Face Recognition Terminal User Manual Note The name supports digits, upper case letters, lower case letters, and special characters. ● The name should be within 128 characters. ● 4. Set the face, card, fingerprint, and palm print. Note Refers to Add Face Picture , Add Card , Add Fingerprint , and to add face, card, fingerprint and ●...

  • Page 84: Set Person Door Permission Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Search Person On the Person Management page, Tap the search area to enter the Search Person page. Tap Card on the left of the page and select a search type from the drop-down list. Enter the employee ID, card No., or the person name for search.
  • Page 85 DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-11 Add Person 2. Tap Employee ID and you can edit the Employee ID. Note The employee ID cannot be more than 32 characters. It can be a combination of upper case letters, lower case letters, and digits.

  • Page 86: Data Management

    DS-K1T673 Series Face Recognition Terminal User Manual Note The name supports digits, upper case letters, lower case letters, and special characters. ● The name should be within 128 characters. ● 4. Set the face, card, fingerprint, and palm print. Note Refers to Add Face Picture , Add Card , Add Fingerprint , and to add face, card, fingerprint and ●...

  • Page 87: Export Data

    DS-K1T673 Series Face Recognition Terminal User Manual Note The imported access control parameters are configuration files of the device. 4. Enter the created password when you exported the data. If you do not create a password when you exported the data, leave a blank in the input box and tap OK immediately.

  • Page 88: Person Authentication

    DS-K1T673 Series Face Recognition Terminal User Manual 7.5 Person Authentication After network configuration, system parameters configuration and user configuration, you can go back to the initial page for authentication. The system will authenticate person according to the configured authentication mode.

  • Page 89: Basic Settings

    DS-K1T673 Series Face Recognition Terminal User Manual Steps 1. Authenticate any credential according to the instructions on the live view page. Note The card can be normal IC card, or encrypted card. ● If the QR Code Scanning function is enabled, you can put the QR code in front of the device ●...

  • Page 90: Enable/Disable Voice Prompt Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-12 Basic Settings Page 7.6.1 Enable/Disable Voice Prompt via Device You can enable/disable the voice prompt function and adjust the voice volume. Login the device. For details, see Login . Tap System Settings → Basic → Sound Settings.

  • Page 91: Set Device Time Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual You can enable Voice Prompt function and adjust the voice volume. Enable the voice prompt function and you can set the voice volume. 7.6.2 Set Device Time via Device Set the device time.

  • Page 92: Set Privacy Parameters Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Login the device. For details, see Login . Tap System Settings → Basic → Beauty. Enable the beauty function and set the smooth and the whiten parameter. Tap + or - to control the effect strength.

  • Page 93: Set Secure Door Control Unit Parameters

    DS-K1T673 Series Face Recognition Terminal User Manual Go to System → Basic → Video Standard。 Set the video frame rate when performing live view remotely. After changing the standard, you should reboot the device to take effect. PAL (50HZ) 25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East countries, Europe countries, etc.

  • Page 94: Set Face Liveness Level Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-13 Face Settings 7.7.1 Set Face Liveness Level via Device After enabling face anti-spoofing function, you can set the matching security level when performing live face authentication. Login the device. For details, see Login .

  • Page 95: Set Recognition Distance Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Tap System Settings → Biometrics → Face . Select a face liveness level. You can select from general, advanced, and professional. The higher the level, the fault acceptance rate will be lower and the false rejection rate will be higher.

  • Page 96: Enable/Disable Eco Mode Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual The larger the value of the threshold, the fault acceptance rate will be lower and the false rejection rate will be higher when authenticating via face. The maximum value is 100. 7.7.6 Enable/Disable ECO Mode via Device If the ECO mode is enabled, you can authenticate faces in the low light or dark environment with IR camera.

  • Page 97: Enable/Disable Mask Detection Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Must Wear If the person do not wear the hard hat when authenticating, the device will pop up a prompt and the door will keep closed. 7.7.8 Enable/Disable Mask Detection via Device After enabling the face with mask detection, the system will recognize the captured face with mask picture.

  • Page 98: Enable/Disable Multi-Faces Recognition

    DS-K1T673 Series Face Recognition Terminal User Manual If the person do not wear a face mask when authenticating, the device prompts a notification and the door will open. Must Wear If the person do not wear a face mask when authenticating, the device prompts a notification and the door keeps closed.

  • Page 99: Access Control Settings

    DS-K1T673 Series Face Recognition Terminal User Manual 7.8 Access Control Settings You can set the access control permissions. On the Home page, tap ACS to enter the Settings page. Figure 7-14 Access Control Settings 7.8.1 Set Terminal Authentication Mode via Device Select the face recognition terminal's authentication mode.

  • Page 100: Set Reader Authentication Mode Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Login the device. For details, see Login . Tap ACS → Terminal Auth. Mode . Select person authentication type and method and save the settings. If all persons on the device’s authentication mode is Device Mode, all persons on the device will use the device authentication mode.

  • Page 101: Enable/Disable Nfc Card

    DS-K1T673 Series Face Recognition Terminal User Manual Enable Manually Trigger Authentication via Face, and set Authentication as Single or Continuous Single The person should tap Authentication on the authentication page manually to trigger recognition before each face recognition. Continuous After triggering the recognition, you can recognize via face until the device enter into the sleeping mode.

  • Page 102: Set Authentication Interval Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Tap ACS. Enable Remote Authentication. When there’s a person is authenticating, the remote platform will judge to pass or not. Authenticate the credential on the device and verify by the platform. You can also enable Verify Credential Locally and the verification will be produced on the device.

  • Page 103: Platform Attendance

    DS-K1T673 Series Face Recognition Terminal User Manual Set Door No. via Device Select a door No. for the device. Login the device. For details, see Login . After login, tap ACS. Tap Door No.. Select Door 1 or Door 2.

  • Page 104: Set Manual Attendance Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Tap Platform Attendance to enter the T&A Status page. Figure 7-15 Disable Attendance Mode Set the Attendance Mode as Disable. You will not view or configure the attendance status on the initial page. And the system will follow the attendance rule that configured on the platform.

  • Page 105: Set Auto Attendance Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-16 Manual Attendance Mode 3. Enable the Attendance Status Required. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required.
  • Page 106 DS-K1T673 Series Face Recognition Terminal User Manual Steps 1. Tap Platform Attendance to enter the T&A Status page. 2. Set the Attendance Mode as Auto. Figure 7-17 Auto Attendance Mode 3. Enable the Attendance Status function. 4. Enable a group of attendance status.

  • Page 107: Set Manual And Auto Attendance Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break. 7.9.4 Set Manual and Auto Attendance via Device Set the attendance mode as Manual and Auto, and the system will automatically change the attendance status according to the configured schedule.

  • Page 108: Preference Settings

    DS-K1T673 Series Face Recognition Terminal User Manual 6. Set the status' schedule. 1) Tap Attendance Schedule. 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday. 3) Set the selected attendance status's start time of the day. 4) Tap OK.

  • Page 109: Set Shortcut Key Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 7-19 Preference Settings 7.10.1 Set Shortcut Key via Device Choose the shortcut key that displayed on the authentication page, including the QR code function, the call function, call type, and the password entering function.

  • Page 110: Theme

    DS-K1T673 Series Face Recognition Terminal User Manual Tap System Settings → Preference. Choose the shortcut key that displayed on the authentication page, including the QR code function, the call function, call type, and the password entering function. Figure 7-20 Shortcut Key Settings Password Enable this function and you can enter the password to authenticate via password.

  • Page 111: System Maintenance

    DS-K1T673 Series Face Recognition Terminal User Manual Authentication The live view will be displayed in authentication, and in the meanwhile, the person's name, employee ID, face pictures will all displayed as well. Advertisement The advertising area and identification authentication area of the device will be displayed on separate screens.

  • Page 112: View Device Capacity Via Device

    DS-K1T673 Series Face Recognition Terminal User Manual The lock duration after enabling Lock Face for Anti-Spoofing Protection when anti-spoofing detection failed. Version Information You can view the device information. 7.11.2 View Device Capacity via Device You can view the device capacity.

  • Page 113: Restore Settings

    DS-K1T673 Series Face Recognition Terminal User Manual 7.11.4 Restore Settings Restore to Factory Settings via Device All parameters will be restored to the factory settings. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and login the home page.

  • Page 114: Call Center From Device

    DS-K1T673 Series Face Recognition Terminal User Manual Note For details about adding device, see Add Device. 5. Call the client software. 1) Tap on the device initial page. 2) Enter 0 in the pop-up window. 3) Tap to call the client software.

  • Page 115: Call Device From Client Software

    DS-K1T673 Series Face Recognition Terminal User Manual 7.12.3 Call Device from Client Software Steps 1. Get the client software from the supplied disk or the official website, and install the software according to the prompts. 2. Run the client software and the control panel of the software pops up.

  • Page 116: Call Mobile Client From Device

    DS-K1T673 Series Face Recognition Terminal User Manual 7.12.5 Call Mobile Client from Device Steps 1. Get the mobile mobile client from the supplied disk or the official website, and install the software according to the prompts. 2. Run the mobile client and add the device to the mobile client.

  • Page 117: Chapter 8 Operation Via Web Browser

    Answer the security questions. E-mail Verification 1. Export the QR code and send it to pw_recovery@hikvision.com as attachment. 2. You will receive a verification code within 5 minutes in your reserved email. 3. Enter the verification code into the verification code field to verify your identification.

  • Page 118: Help

    DS-K1T673 Series Face Recognition Terminal User Manual 8.4 Help 8.4.1 Open Source Software Licenses You can view open source software licenses. Click → Open Source Software Statement on the upper-right corner to view the licenses. 8.4.2 View Online Help Document You can view the help document for Web configuration.

  • Page 119: Select Language

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-1 Change Password Click Next to complete the settings. Or click Skip to skip the step. 8.6.2 Select Language You can select a language for the device system. Click in the top right of the web page to enter the Device Language Settings page. You can select a language for the device system from the drop-down list.

  • Page 120: Environment Settings

    DS-K1T673 Series Face Recognition Terminal User Manual You should set the NTP server's IP address, port No., and interval. Manual By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time.

  • Page 121: Administrator Settings

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-2 Privacy Settings Picture Uploading and Storage Save Picture When Authenticating Save picture when authenticating automatically. Upload Picture When Authenticating Upload the pictures when authenticating to the platform automatically. Save Registered Picture The registered face picture will be saved to the system if you enable the function.

  • Page 122: And System Network

    DS-K1T673 Series Face Recognition Terminal User Manual 1) Click Add Face to upload a face picture from local storage. Note The uploaded picture should be within 200 K, in JPG、JPEG、PNG format. 2) Click Add Card to enter the Card No. and select the property of the card.

  • Page 123: Person Management

    DS-K1T673 Series Face Recognition Terminal User Manual Set the device installed door station No. Note The main door station No. is 0, and the sub door station No. ranges from 1 to 16. Outer Door Station No. Set the device installed outer door station No.

  • Page 124: Authentication Settings

    DS-K1T673 Series Face Recognition Terminal User Manual Enable Long-Term Effective User, or set Long-Term Effective User, and the person can only has the permission within the configured time period according to your actual needs. Set the door permission. Click Save to save the settings.
  • Page 125 DS-K1T673 Series Face Recognition Terminal User Manual Add Palm Print Note Only devices supporting the palm print function can add the palm print. ● Up to 10000 palm print and palm vein can be added. ● Click Person Management → Add Palm Print to enter the Add Person page.

  • Page 126: Access Control Management

    DS-K1T673 Series Face Recognition Terminal User Manual 8.8 Access Control Management 8.8.1 Overview You can view the live video of the device, linked device, person information, network status, basic information, and device capacity. Function Descriptions: Door Status Click on the video to view the device live video.

  • Page 127: Search Event

    DS-K1T673 Series Face Recognition Terminal User Manual Note You can click View More to go to . Person Information You can view the added and not added information of person credentials. Network Status You can view the connected and registered status of wired network, wireless network, Hik- Connect, ISUP, OTAP, and VoIP.
  • Page 128 DS-K1T673 Series Face Recognition Terminal User Manual View Device Online Status View and refresh the device status. Click Access Control → Parameter Settings → Door Parameters to enter the settings page. You can view the online status of the device. Click Refresh to refresh the status of the device.
  • Page 129 DS-K1T673 Series Face Recognition Terminal User Manual Set Exit Button via PC Web Set the exit button as remain open or remain closed according to the actual wiring method. Click Access Control → Parameter Settings → Door Parameters to enter the settings page.

  • Page 130: Authentication Settings

    DS-K1T673 Series Face Recognition Terminal User Manual Note Duress code and super password can’t be duplicated, usually consisting of 4 to 8 digits. Set Super Password via PC Web Administrator or designated person can enter the super password to open the door.
  • Page 131 DS-K1T673 Series Face Recognition Terminal User Manual Select Main or Sub Card Reader via PC Web Set the terminal for person authentication. Click Access Control → Parameter Settings → Authentication Settings to enter the settings page. Select the terminal as main or sub card reader.
  • Page 132 DS-K1T673 Series Face Recognition Terminal User Manual When selecting sub card reader as the Terminal, you can select Authentication from the drop- down list. Click Save. Manually Trigger Authentication via Face on PC Web After enablingManually Trigger Authentication via Face, you need to touch the screen of the device manually for face recognition.
  • Page 133 DS-K1T673 Series Face Recognition Terminal User Manual Set Authentication Interval via PC Web You can set the authentication interval of the same person when authenticating. The same person can only authenticate once in the configured interval. A second authentication will be failed. If other person authenticate in the configured interval, the person can authenticate again.
  • Page 134 DS-K1T673 Series Face Recognition Terminal User Manual Enable Card No. Reversing, the read card No. will be in reverse sequence. Click Save. Set Sub Card Reader Position You can choose the position for the sub card reader. Click Access Control → Parameter Settings → Authentication Settings to enter the settings page.

  • Page 135: Set Face Parameters

    DS-K1T673 Series Face Recognition Terminal User Manual 8.8.5 Set Face Parameters Figure 8-4 Set Face Parameters Enable/Disable Face Anti-spoofing via Web Browser When enabled, the device can recognize whether the person is a live one or not. Click Access Control → Parameter Settings → Smart to enter the settings page.
  • Page 136 DS-K1T673 Series Face Recognition Terminal User Manual Enable or disable the live face detection function. When enabled, the device can recognize whether the person is a live one or not. If the face is not a live one, authentication will fail.
  • Page 137 DS-K1T673 Series Face Recognition Terminal User Manual Set Yaw Angle via PC Web You can set the yaw angle of the lens during face recognition and authentication. Click Access Control → Parameter Settings → Smart to enter the settings page.
  • Page 138 DS-K1T673 Series Face Recognition Terminal User Manual Set 1:N Matching Threshold via PC Web You can set the matching threshold for face 1:N matching. Click Access Control → Parameter Settings → Smart to enter the settings page. Set the 1:N matching threshold and click Save.
  • Page 139 DS-K1T673 Series Face Recognition Terminal User Manual Enable/Disable ECO Mode via PC Web If the ECO mode is enabled, you can authenticate faces in the low light or dark environment with IR camera. Click Access Control → Parameter Settings → Smart to enter the settings page.
  • Page 140 DS-K1T673 Series Face Recognition Terminal User Manual If the person do not wear the face mask when authenticating, the device will pop up a prompt and the door will open. Must Wear Face Mask If the person do not wear the face mask when authenticating, the device will pop up a prompt and the door will keep closed.

  • Page 141: Card Settings

    DS-K1T673 Series Face Recognition Terminal User Manual 8.8.6 Card Settings Enable/Disable NFC Protection via PC Web After enabling, the device can read NFC card. Click Access Control → Parameter Settings → Card Settings to enter the settings page. Click to Enable NFC Card and click Save. After enabling, the device can read NFC card. If the data of access control devices is obtained by mobile devices, the situation of unauthenticated access may occur.
  • Page 142 DS-K1T673 Series Face Recognition Terminal User Manual Enable/Disable CPU Card via Web Client After enabling, the device can recognize CPU card and users can swipe CPU card via the device. Click Access Control → Parameter Settings → Card Settings to enter the settings page.

  • Page 143: Elevator Control Via Web

    DS-K1T673 Series Face Recognition Terminal User Manual 8.8.7 Elevator Control via Web Steps 1. Click Access Control → Parameter Settings → Elevator Control Parameters . Figure 8-5 Elevator Control 2. Enable Elevator Control. 3. Set the elevator parameters. Main Elevator Controller Model Select an elevator No.

  • Page 144: Linkage Settings

    DS-K1T673 Series Face Recognition Terminal User Manual After the person passes authentication, the device will call elevator to its floor and authorize the permission of the floor linked to the person's room. The person can get to the target floor by pressing corresponding floor No.

  • Page 145: Set Working Mode Via Pc Web

    DS-K1T673 Series Face Recognition Terminal User Manual Note To use the recording function, you need to prepare the SD card. After recording, you can click Event Search to view recordings. For details, see Search Event 5. ClickSave to enable the settings.
  • Page 146 DS-K1T673 Series Face Recognition Terminal User Manual Click Access Control → Parameter Settings → Privacy Settings to enter the settings page. You can select Event Storage Type as Delete Old Events Periodically, Delete Old Events by Specified Time or Overwriting.
  • Page 147 DS-K1T673 Series Face Recognition Terminal User Manual Save Registered Picture The registered face picture will be saved to the system if you enable the function. Save Pictures After Linked Capture If you enable this function, you can save the picture captured by linked camera to the device.

  • Page 148: Call Settings

    DS-K1T673 Series Face Recognition Terminal User Manual 8.8.12 Call Settings Set Device No. via Web The device can be used as a door station or outer door station. You should set the device No. before usage. Click Access Control → Call Settings → Device No. .
  • Page 149 DS-K1T673 Series Face Recognition Terminal User Manual Set the device installed floor No. Note If you change the No., you should reboot the device. ● The main door station No. is 0, and the sub door station No. ranges from 1 to 16.
  • Page 150 DS-K1T673 Series Face Recognition Terminal User Manual Refers to the SIP server IP. Enter the main station’s IP address that used for communication. At this time the main station is used as a SIP server. Other intercom devices should registered to this server address to realize communication.
  • Page 151 DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-9 Press Button to Call 2. Select Call Specified Indoor Station, Call Management Center, Call Indoor Station or APP at your needs. Note If you select Call Specified Indoor Station, you need to enter the Room No. of the indoor station.

  • Page 152: System Configuration

    DS-K1T673 Series Face Recognition Terminal User Manual 8.9 System Configuration 8.9.1 View Device Information via PC Web View the device name, device No., language, model, serial No., version, number of channels, IO input, IO output, lock, local RS-485 number, register number, alarm input, alarm output, and device capacity, etc.

  • Page 153: Change Administrator's Password

    DS-K1T673 Series Face Recognition Terminal User Manual Click Save to save the settings after the configuration. Time Zone Select the device located time zone from the drop-down list. Time Sync. You should set the NTP server's IP address, port No., and interval.

  • Page 154: View Device Arming/Disarming Information Via Pc Web

    DS-K1T673 Series Face Recognition Terminal User Manual Steps 1. Click System and Maintenance → System Configuration → System → User Management → User Management → Account Security Settings . 2. Change the security questions or email address according your actual needs.
  • Page 155 DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-12 TCP/IP Settings Page Set the parameters and click Save to save the settings. NIC Type Select a NIC type from the drop-down list. By default, it is Auto. DHCP If uncheck the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, Mac address, and MTU.
  • Page 156 DS-K1T673 Series Face Recognition Terminal User Manual Steps Note The function should be supported by the device. 1. Click System and Maintenance → System Configuration → Network → Network Settings → Wi- Fi . Figure 8-13 Wi-Fi Settings Page 2. Check Wi-Fi.
  • Page 157 DS-K1T673 Series Face Recognition Terminal User Manual Steps 1. Click Access Control → System Configuration → Network → Network Settings → Bluetooth to enter the settings page. 2. In the bluetooth parameter configuration section, enable Open. 3. Enter the external sound in the Device Name. After the bluetooth is connected, click Save.
  • Page 158 DS-K1T673 Series Face Recognition Terminal User Manual View WebSocket and WebSockets port. Enable SDK Service After enabling SDK service, the device can be connected to the SDK server. Click System and Maintenance → System Configuration → Network → Device Access → SDK Server to enter the settings page.
  • Page 159 DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-14 Set OTAP 2. Click to Enable OTAP. 3. Set Server IP Address, Port, Device ID and Encryption Key. 4. Click Test to ensure the device can connect to the server and register successfully. Refresh the page or restart the device to see the Register Status.
  • Page 160 DS-K1T673 Series Face Recognition Terminal User Manual Note 8 to 32 letters (a to z, A to Z) or numbers (0 to 9), case sensitive. You are recommended to use a combination of no less than 8 letters or numbers.

  • Page 161: Set Video And Audio Parameters Via Pc Web

    DS-K1T673 Series Face Recognition Terminal User Manual The device displayed call number and user name. 4. Click Save. 8.9.7 Set Video and Audio Parameters via PC Web Configure Video Parameters via Web Browser You can set quality, resolution and other parameters of device camera.

  • Page 162: Image Parameter Settings

    DS-K1T673 Series Face Recognition Terminal User Manual 8.9.8 Image Parameter Settings Figure 8-16 Display Settings Figure 8-17 OSD Settings Set Brightness/Contrast/Saturation/Sharpness via PC Web You can set picture information such as brightness, contrast, saturation and sharpness of live view page.
  • Page 163 DS-K1T673 Series Face Recognition Terminal User Manual Drag the block or enter numbers to set brightness, contrast, saturation and sharpness. Click Restore Default Settings to restore the to the default. Set LED Light via PC Web You can adjust the brightness of the supplement light.

  • Page 164: Alarm Settings Via Pc Web

    DS-K1T673 Series Face Recognition Terminal User Manual Set Beauty Parameters via PC Web After enabling, you can whiten or smooth authenticated pictures. Click System and Maintenance → System Configuration → Image → Display Settings to enter the settings page. Enable Beauty, drag the block or enter numbers to set the whiten and smooth level.

  • Page 165: Access Configuration

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-18 Alarm Settings Continuous Alarm When the alarm is triggered, it will alarm continuously. Custom Alarm Duration You can set Alarm Duration for the device when the alarm is triggered. 8.9.10 Access Configuration Set RS-485 Parameters via PC Web You can set the RS-485 parameters including the peripheral, address, baud rate, etc.
  • Page 166 DS-K1T673 Series Face Recognition Terminal User Manual Note If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address according to the door No.

  • Page 167: Time And Attendance Settings

    DS-K1T673 Series Face Recognition Terminal User Manual Note If you change the peripheral, and after you save the device parameters, the device will reboot automatically. Set Secure Door Control Unit Parameters via PC Web You can set secure door control unit parameters.
  • Page 168 DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-20 Time and Attendance Disable Attendance Mode via Web Disable the attendance mode and the system will not display the attendance status on the initial page. Steps 1. Click System and Maintenance → System Configuration → Platform Attendance to enter the settings page.
  • Page 169 DS-K1T673 Series Face Recognition Terminal User Manual 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required. Result You should select an attendance status manually after authentication.

  • Page 170: Preference Settings

    DS-K1T673 Series Face Recognition Terminal User Manual Steps 1. Click System and Maintenance → System Configuration → Platform Attendance to enter the settings page. 2. Set the Attendance Mode as Manual and Auto. 3. Enable the Attendance Status Required function.

  • Page 171: Set Standby Image Via Pc Web

    DS-K1T673 Series Face Recognition Terminal User Manual Click Save. 8.10.2 Set Standby Image via PC Web Set the standby image parameters, including the time to enter satndby, screen saver picture, displayed effect, and slide show interval. Go to System and Maintenance → Preference → Screen Display .

  • Page 172: Customize Authentication Desk Via Pc Web

    DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-23 Sleep Settings Slide Sleep and set the sleep time. Click Save. 8.10.4 Customize Authentication Desk via PC Web Customize the modules on the authentication page/desk. Steps 1. Go to System and Maintenance → Preference → Custom Home Page .

  • Page 173: Set Notice Publication Via Pc Web

    DS-K1T673 Series Face Recognition Terminal User Manual The ad takes up the full screen of authentication page. Screensaver, Welcome Message can be played in ad. Ad in Split Screen Authentication page includes ad area and authentication area. Screensaver, Welcome Message can be played in ad.

  • Page 174: Set Prompt Schedule Via Pc Web

    DS-K1T673 Series Face Recognition Terminal User Manual Standard If you select standard, you can set the background color and picture. Play Schedule After you have created a theme, you can select the theme and draw a schedule on the time line.

  • Page 175: Customize Prompt Voice Via Pc Web

    DS-K1T673 Series Face Recognition Terminal User Manual 4. Select time schedule. 5. Set the time period when authentication succeeded. 1) Click Add Time Duration. 2) Set the time duration. Note If authentication is succeeded in the configured time duration, the device will broadcast the configured content.

  • Page 176: Set Authentication Result Text Via Pc Web

    DS-K1T673 Series Face Recognition Terminal User Manual 8.10.8 Set Authentication Result Text via PC Web Steps 1. Go to System and Maintenance → Preference → Authentication Result Text . Figure 8-28 Authentication Result Text 2. Enable Customize Authentication Result Text.

  • Page 177: Restoration

    DS-K1T673 Series Face Recognition Terminal User Manual Online Upgrading via PC Web You can upgrade the device online. Click System and Maintenance → Maintenance → Upgarde to enter the settings page. ClickCheck for Updatesto check whether there is updated versions.

  • Page 178: Import Device Parameters Via Pc Web

    DS-K1T673 Series Face Recognition Terminal User Manual 8.11.5 Import Device Parameters via PC Web Import the configuration parameters. Go to System and Maintenance → Maintenance → Backup and Reset . Import Config File Click and select a file from local PC. Click Import.
  • Page 179 DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-29 Protocol Testing Select a protocol address, and enter the protocol. Click Execute. Debug the device according to the response header and returned value. Network Diagnosis via PC Web Enter the device IP address or domain name, you can perform PING settings. Debug the network according to the PING result.
  • Page 180 DS-K1T673 Series Face Recognition Terminal User Manual Figure 8-30 Network Diagnosis Enter the device IP for PING operation, select the network connection mode, PING duration, and Ping data package size (default parameter is recommended.) Click Diagnose. The result will displayed in PING Result.

  • Page 181: View Log Via Pc Web

    DS-K1T673 Series Face Recognition Terminal User Manual 8.11.7 View Log via PC Web You can search and view the device logs. Go to System and Maintenance → Maintenance → Log . Set the major and minor type of the log type. Set the start time and end time for searching, and click Search.

  • Page 182: Certificate Management

    DS-K1T673 Series Face Recognition Terminal User Manual 8.11.10 Certificate Management It helps to manage the server/client certificates and CA certificate. Note The function is only supported by certain device models. Create and Import Self-signed Certificate Steps 1. Go to System and Maintenance → Safe → Certificate Management .
  • Page 183 DS-K1T673 Series Face Recognition Terminal User Manual Steps 1. Go to System and Maintenance → Safe → Certificate Management . 2. Create an ID in the Import CA Certificate area. Note The input certificate ID cannot be the same as the existing ones.

  • Page 184: Chapter 9 Other Platforms To Configure

    DS-K1T673 Series Face Recognition Terminal User Manual Chapter 9 Other Platforms to Configure You can also configure the device via iVMS-4200 Client Software or HikCentral Access Control. For details, see the platforms' user manual. iVMS-4200 Client Software Click/tap the link to view the client software's user manual.

  • Page 185: Appendix A. Tips For Scanning Fingerprint

    DS-K1T673 Series Face Recognition Terminal User Manual Appendix A. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger: You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center.
  • Page 186 DS-K1T673 Series Face Recognition Terminal User Manual Environment The scanner should avoid direct sun light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again.

  • Page 187: Appendix B. Tips When Collecting/Comparing Face Picture

    DS-K1T673 Series Face Recognition Terminal User Manual Appendix B. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below: Positions (Recommended Distance: 0.3 m) Expression Keep your expression naturally when collecting or comparing face pictures, just like the ●...
  • Page 188 DS-K1T673 Series Face Recognition Terminal User Manual Size Make sure your face is in the middle of the collecting window.

  • Page 189: Appendix C. Tips For Adding Palm Print And Palm Vein

    DS-K1T673 Series Face Recognition Terminal User Manual Appendix C. Tips for Adding Palm Print and Palm Vein When recognizing the palm print and palm vein, place the center of the palm at a distance of ● 5~12 cm from the center of the device, and pay attention to keeping it parallel to the peripheral module.

  • Page 190: Appendix D. Tips For Installation Environment

    DS-K1T673 Series Face Recognition Terminal User Manual Appendix D. Tips for Installation Environment 1. Light Source Illumination Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 2. Avoid backlight, direct and indirect sunlight...

  • Page 191: Appendix E. Dimension

    DS-K1T673 Series Face Recognition Terminal User Manual Appendix E. Dimension Figure E-1 Dimension...
  • Page 192 UD24660B-H...

This manual is also suitable for:

Ds-k1t673dxDs-k1t673dwxDs-k1t673tdxDs-k1t673tdwxDs-k1t673tdgxDs-k1t673tmw ... Show all

Table of Contents