Honeywell T775B Series Instruction Instructions page 33

3. SCHEDULING
MAIN
SCHEDULE
MON-FRI
E1 TIME
Fig. 76. Schedule - Event 1 Time.
MAIN
3.3.2. E1 TIME
SCHEDULE
MON-FRI
E1 TIME
6:00 AM
SET
TIME
FOR
EVENT 1
M24543
3.3.3. E2 SETPOINT
Creating the setpoint for event 2 is accomplished the
same way as the first event. See "3.3.1. E1 SETPT
(setpoint for event 1)" on page 32 above.
3.3.4. E2 TIME
Creating the time for event 2 is accomplished the same
way as the first event. See "3.3.2. E1 TIME (time for event
1)" above.
3.3.5. EXIT
After entering the time for event 2, use the
the schedule time period and return to the Schedule menu
(Fig. 69 on page 30) to select a different time period.
When you finish scheduling the time periods, continue
with "3.4. Exiting Scheduling Mode".
3.4. Exiting Scheduling Mode
Press the HOME button to exit the Schedule menu and
return to the home screen display.
This completes the Scheduling procedure.
T775A/B/M SERIES 2000 CONTROLLER
(time for event 1)
1. From the selected time period menu, use the
buttons to highlight E1 TIME.
2. Press the button to display the current time set-
ting for event 1.
3. Use the button to cycle between the hour,
minute, and AM/PM values.
4. Use the and
desired value for the hour, minute, and AM/PM.
5. Press the button to accept the time and return to
the selected time period menu.
(setpoint for event 2)
(time for event 2)
(exit from selected time period settings)
33
buttons to increase/decrease the
button to exit
62-0254–03
and