Honeywell T775B Series Instruction Instructions page 12

T775A/B/M SERIES 2000 CONTROLLER
Accessing the Menus
Menus are used for programming, scheduling, viewing the
summary settings, and setup of advanced options.
Programming, Scheduling, and Summary Menus
To access these menus from the home screen, press the
MENU button. See Fig. 24.
MENU DISPLAY WHEN
SCHEDULING IS SET
HOME
RELAYS 1 2 3 4
ON
SENSORS
PROGRAM
SENSOR A
SCHEDULE
78
o
F
SUMMARY
SENSOR B
EXIT
84
o
F
MOD1 40%
MOD2 60%
DI ON
home menu
Fig. 24. Menus.
Depending on whether scheduling is enabled or not, the
LCD displays one of two menus as shown in Fig. 24.
Scheduling is enabled from the Setup menu's Output
settings (see "2.3.3.1. USE SCHED" on page 24).
Setup Menu
To access the Setup menu, press and hold the MENU
button for five seconds. See Fig. 25.
62-0254–03
MENU DISPLAY WHEN
SCHEDULING IS NOT SET
MENU MENU
PROGRAM
EXIT
OR
HOME
RELAYS 1 2 3 4
ON
SENSORS
SENSOR A
78
SENSOR B
84
MOD1
MOD2
DI ON
home
Using the Menus
When you are working with the menus, use the:
• Left arrow button ( ) to scroll backward through the
menus
M24490 • Right arrow button ( ) to select the highlighted menu
item and display its content
• Up and Down arrow buttons (
and down through a list of items or to increase or
decrease the value of a displayed parameter
NOTE: If you press the HOME button or there is no key-
pad activity for four minutes, you exit Program
mode and return to the home screen.
If you press the MENU button, you exit and
return to the menu.
12
INTERFACE OVERVIEW
SETUP
SENSORS
OUTPUTS
o
F
EXIT
o
F
40%
60%
FIVE
menu
SECONDS
Fig. 25. Setup Menu.
and
M24491
) to scroll up