Honeywell T775B Series Instruction Instructions page 19

2. SETUP (ADVANCED OPTIONS)
Fig. 40. Setup - Sensors - Sensor A - Exit.
SETUP
SENSORS SENSORS
# SENSORS
SENSOR A
SENSOR B
EXIT
Fig. 41. Setup - Sensors - Sensor B Menu.
SETUP
SENSORS
SENSOR A
UNITS
CALIBRATE
LABEL
EXIT
SETUP
SETUP
SENSORS
SENSOR B
CALIBRATE
LABEL
LIMIT
EXIT
2.2.2.4. Exit Sensor A Setup
Press the button to exit Sensor A selections and return
to the Sensors menu.
or
Use the and
button.
M24506
2.2.3. SENSOR B
For the T775M2030 and T775M2048 models only, which
have a High/Low modulating temperature limit, the LIMIT
item displays on the Sensor B menu.
1. From the Sensors menu, use the
light SENSOR B.
2. Press the
M24507
2.2.3.1. CALIBRATE
Setting the calibration value is accomplished the same
way as the Sensor A. See "2.2.2.2. CALIBRATE (the
sensor)" on page 18 above.
2.2.3.2. LABEL
Setting the label is accomplished the same way as the
Sensor A. See "2.2.2.3. LABEL (the sensor input)" on
page 18 above.
19
T775A/B/M SERIES 2000 CONTROLLER
buttons to highlight EXIT and press the
button to display the Sensor B menu.
button to high-
62-0254–03